Reference Manual - Videx, Inc.

More documents

Recommendations

Info

Removing KeysScan an RFID card or enter four or more digits on the keypad, followed by #. Thecabinet will beep and release the door latch. The keypad display will show a mapof the key locations inside the cabinet represented by the letter v. The letter orepresents an open socket, and the letter X represents the key which has beenreleased for removal.Open the door. The key indicated by the letter X will be flashing.Remove the key. The display will show KEY OUT.Close the door. The display will showREADY, then go black after 20 seconds.Number Code FunctionsEntering a 2-digit code on the keypad, followed by the # key, will cause the cabinet to performvarious functions which are a subset of those available in Normal Mode. These functions areas follows:11#: displays the serial number of the Vault 20 FX, minus the leading O.22#: causes the Vault 20 FX to contact its CyberAudit-Web server. If successful,it displays "ONLINE!". Otherwise, it displays an error message indicating thecause of the failure.33#: displays the date and time from the Vaults clock.44#: not used in demo mode55#: not used in demo mode66#: not used in demo mode77#: not used in demo mode88#: unlatches the Vault door. The display shows the key map.
99#: not used in demo mode00#: exits whatever mode the system was in and returns to normal operation.The display shows "READY".
Page 1:
CyberAudit-Web Professional Context
Page 7 and 8:
CyberKeysIssue NumbersReplace KeyCh
Page 9:
About This ManualThis manual is int
Page 12 and 13:
CyberLock CylinderThe CyberLock cyl
Page 14 and 15:
The rechargeable battery charges in
Page 16 and 17:
CommunicatorsExpired keys need to b
Page 18 and 19:
USB IR EncoderThe CyberKey IR Encod
Page 20 and 21:
CyberAudit-Web Professional uses me
Page 22 and 23:
How-To'sAdd:CyberKeysCylindersDoors
Page 24 and 25:
CyberAudit-Web Professional License
Page 26 and 27:
7.2 ExclusionsTHE LIMITED WARRANTY
Page 28 and 29:
ConceptsDefines the hardware compon
Page 30 and 31:
1.2.- Creates a printable list of t
Page 32 and 33:
What is a Tag?In CyberAudit-Web, a
Page 34 and 35:
SchedulesSchedules allow keys to op
Page 36 and 37:
Holidays"Holidays," which do not ha
Page 38 and 39:
Granting Access to Locks - Access i
Page 40 and 41:
The Keyword filter supports pattern
Page 42 and 43:
CyberKeysThree types of CyberKeys a
Page 44 and 45:
CyberKey Product InfoCyberKeys are
Page 47 and 48:
CommunicatorsCommunicators are a co
Page 49 and 50:
CyberAudit-Web System HelpCyberAudi
Page 51 and 52:
CyberAudit-Web Context HelpContext
Page 53 and 54:
Change IconA change icon, , indicat
Page 55 and 56:
The CyberAudit-Web Item Chooser Con
Page 57 and 58:
Wildcard RulesAn astrisk "*" means
Page 59:
CyberAudit-Web Installation KeyDefi
Page 62 and 63:
New DatabaseThe next decision is re
Page 64 and 65:
Passwords from Manual InputsEnter m
Page 66 and 67:
Passwords from a Grand MasterThe so
Page 68 and 69:
CyberLink - The program that commun
Page 70 and 71:
Upgrading from CyberAudit Professio
Page 72 and 73:
Import WarningsCyberAudit-Web requi
Page 74 and 75:
Update the Grand Master used in the
Page 76 and 77:
1.2.3.4.5.Getting StartedThis secti
Page 78 and 79:
Update each key using either the En
Page 80 and 81:
Audit ReportsAudit Reports are used
Page 82 and 83:
Email SetupEmail server: - CyberAud
Page 84 and 85:
Operating OptionsThe preferences se
Page 86 and 87:
Lock OptionsIf CyberLocks will be p
Page 88 and 89:
Re-key All LocksRe-keying CyberLock
Page 90 and 91:
Generate "No Access" events in lock
Page 92 and 93:
Expiration RulesExpiration is an im
Page 94 and 95:
Master Keys in CyberAudit-WebA Cybe
Page 96 and 97:
Communicators OptionsThis page enab
Page 98 and 99:
Portable LinksName - Name assigned
Page 100 and 101:
USB Station informationStation Ligh
Page 102 and 103:
The CyberLock Flex SystemThe CyberL
Page 104 and 105:
RFID Reader - For scanning 13.56 MH
Page 106 and 107:
Additional Topics:Adding a Flex Sys
Page 108 and 109:
Single CyberKey VaultThe Single Cyb
Page 110 and 111:
Audit Data TrimmingCyberAudit-Web a
Page 112 and 113:
Reactivate the SoftwareReactivating
Page 114 and 115:
Administrator LoginsEach CyberAudit
Page 116 and 117:
Add a New AdministratorCyberAudit-W
Page 118 and 119:
Administrator PermissionsIn CyberAu
Page 120 and 121:
CommunicatorsCommunicators are a co
Page 122 and 123:
Web AuthorizersA CyberKey Web Autho
Page 124 and 125:
Web Authorizer DetailsName - Name a
Page 126 and 127:
Setting Up Web AuthorizersWeb Autho
Page 128 and 129:
1.2.Resetting a Web AuthorizerReset
Page 130 and 131:
Configuring a Web AuthorizerThere a
Page 132 and 133:
If any of these conditions are true
Page 134 and 135:
Web Authorizer Audit Trail Events#
Page 136 and 137:
99 watchdogrestart100 database erro
Page 138 and 139:
Web Authorizer Keyport MessagesMess
Page 140 and 141:
UPGRADESUCCESSBUSY8 DIGITSLINKUPHOS
Page 142 and 143:
Messages at StartupMessages when Id
Page 144 and 145:
The Present IconThe present icon, ,
Page 146 and 147:
If a Web Authorizer reaches CyberAu
Page 148 and 149:
Comm LinksComm Links in CyberAudit-
Page 150 and 151:
CyberLink Result CodesCyberLink get
Page 152 and 153:
Then with a CyberKey Vault or a Cyb
Page 154 and 155:
Portable Links ListThis page lists
Page 156 and 157:
IR EncoderThe IR Encoder is a USB-t
Page 158 and 159:
6. If the device was added using an
Page 160 and 161:
Related Topics:Adding StationsCyber
Page 162 and 163:
Web Station ListThis page lists the
Page 164 and 165:
Web Station PropertiesSerial - An i
Page 166 and 167:
Station Light DefinitionsReady Blin
Page 168 and 169:
Adding a New StationBoth USB Statio
Page 170 and 171:
6. If adding a USB Station, skip th
Page 172 and 173:
Comm Link Audit Trail Events# Event
Page 174 and 175:
The Flex System
Page 176 and 177:
Memory Used - The amount of availab
Page 178 and 179:
View/Edit Flex Hub ModulesView the
Page 180 and 181:
Module Conflict IconA module confli
Page 182 and 183:
3. Enter a name for the hub plus th
Page 184 and 185:
The Edit Flex Hub Modules page enab
Page 186 and 187:
About Groups and Display LinksFlex
Page 188 and 189:
Keypad DisplayMore than one keypad
Page 190 and 191:
GeneralName - The name assigned to
Page 192 and 193:
Programming Flex System Hubs from a
Page 194 and 195:
5. With power applied to the Flex S
Page 196 and 197:
FeatureLarge diameter moduleWeather
Page 198 and 199:
Flex System Demo ModeDemo Mode enab
Page 200 and 201:
LED Indicator on the Weatherized Va
Page 202 and 203:
Flex System Power RequirementsThe F
Page 204 and 205:
Flex System Module Cable PinoutCat
Page 206 and 207:
Messages at setup and administratio
Page 208 and 209:
KEYREADYKEYADDITIONDENIEDKEYASSIGNE
Page 210 and 211:
Flex System Audit Trail Events1 Sys
Page 212 and 213:
363738394142Data receivedfrom I/O m
Page 214 and 215:
116117New PIN inputreceivedCyberKey
Page 216 and 217:
Flex System Special Key InputSpecia
Page 218 and 219:
Flex System Hub DiagnosticsFlex Sys
Page 220 and 221:
Flex System Hub LED IndicatorsThe F
Page 222 and 223:
3. Connect the other end of the pat
Page 224 and 225: LAN AuthorizersThe CyberKey LAN Aut
Page 226 and 227: LAN Authorizer DetailsName - Name a
Page 228 and 229: Adding a LAN Authorizer1. Select "L
Page 230 and 231: Setting Up LAN AuthorizersClick her
Page 232 and 233: Resetting a LAN AuthorizerResetting
Page 234 and 235: LAN Authorizer Audit Trail Events#
Page 236 and 237: Working with Modem AuthorizersModem
Page 238 and 239: ===============================Addi
Page 240 and 241: Configuration where Local Modem Aut
Page 242 and 243: Configuration where Remote Modem Au
Page 244 and 245: Keyport Messages Generated by LAN A
Page 246 and 247: READINGWRITINGKEYREADYINSERT KEYLOW
Page 248 and 249: Vaults
Page 250 and 251: Granting Access to CyberKey VaultsP
Page 252 and 253: Email Notification Settings for Cyb
Page 254 and 255: Vault 20 FX
Page 256 and 257: Vault 20 FX PropertiesGeneralName -
Page 258 and 259: Open Vault - There may be occasions
Page 260 and 261: Setting Up and Configuring a Vault
Page 262 and 263: Since the Vault 20 FX is fundamenta
Page 264 and 265: Insert the USB Memory Stick into th
Page 266 and 267: 3. Click Go.CyberTransfer willpull
Page 268 and 269: 6. With powerapplied to theVault 20
Page 270 and 271: Push Notification PortBoth Flex Sys
Page 272 and 273: The key ID is not issued to another
Page 276 and 277: CyberKey Vault 1
Page 278 and 279: Notification - Enables setting up a
Page 280 and 281: 2.Email Notification for CyberKeys
Page 282 and 283: 612 Mission denied706707Card access
Page 284 and 285: 2. Connect the CyberKeyVault to the
Page 286 and 287: 8. You may insert aCyberKey in the
Page 288 and 289: KeyPresentOff when the Vault cannot
Page 290 and 291: Single CyberKey Vault TonesTone/Sig
Page 292 and 293: System KeysSystem Keys have special
Page 294 and 295: Comm Log - Generates a report of ke
Page 296 and 297: AnchorThe Anchor icon,for the subsy
Page 298 and 299: USB ProgrammersThe USB Programmer i
Page 300 and 301: Adding and Editing System KeysAdd a
Page 302 and 303: 4. Select the type of System Key. C
Page 304 and 305: Grand Master Will Program LocksA Gr
Page 306 and 307: 3. Click the "Save" button.4. The d
Page 308 and 309: 9. Update the Programmer Key or Gra
Page 310 and 311: LocksThis section describes functio
Page 312 and 313: Multi-Key Mode and Open Delay Setti
Page 314 and 315: 3. Place a serial number label on t
Page 316 and 317: To add locks with a Grand Master:Ad
Page 318 and 319: 2. Place a serial number label on t
Page 320 and 321: 2. Now, the Programmer contains the
Page 322 and 323: Naming Locks1. Once the Grand Maste
Page 324 and 325:
Programming LocksProgram locks by:U
Page 326 and 327:
Related Topics:CommunicatorsDownloa
Page 328 and 329:
Steps to Create a Programming Job1.
Page 330 and 331:
6. Touch the locks.7. Update the Pr
Page 332 and 333:
Click on the "This lock or CyberPoi
Page 334 and 335:
3. Check the "Reset" checkbox and c
Page 336 and 337:
Change Icon Report for CyberLocksA
Page 338 and 339:
Locks Bulk EditWith "Bulk Editing"
Page 340 and 341:
People with Access - The number of
Page 342 and 343:
Lock Tag PropertiesA tag's name can
Page 344 and 345:
View Audit Trail Data for CyberLock
Page 346 and 347:
Communication LogsWhen a CyberLock
Page 348 and 349:
CyberPoint ListThis page displays t
Page 350 and 351:
CyberPoint PropertiesThis page disp
Page 352 and 353:
PeopleThis page displays informatio
Page 354 and 355:
People TagsTagsUpdating Keys
Page 356 and 357:
Person section:Name - The person's
Page 358 and 359:
4. Click "Apply."5. There are sever
Page 360 and 361:
Importing Personnel DataPeople reco
Page 362 and 363:
People and Keys Bulk EditThis page
Page 364 and 365:
Clicking the link in the "Locks wit
Page 366 and 367:
People with this TagPeople that don
Page 368 and 369:
Issue NumbersAn issue number is a u
Page 370 and 371:
Change Vault Access NumberVault Acc
Page 372 and 373:
Change Icon Report for CyberKeysA C
Page 374 and 375:
Designating a Lost Key with Disabli
Page 376 and 377:
6. The key is now marked as lost an
Page 378 and 379:
10. The change icons will clear for
Page 380 and 381:
3. Select the This key is not Lost
Page 382 and 383:
CyberKey Behavior SettingsCheck off
Page 384 and 385:
How to Issue a CyberKey to a Person
Page 386 and 387:
4. Update the Key or check one out
Page 388 and 389:
Steps to designate a lost key and p
Page 390 and 391:
4. When prompted, enter the issuenu
Page 392 and 393:
4. The change icon is now cleared i
Page 394 and 395:
Audit Trail Events from CyberKeysCy
Page 396 and 397:
19Access Denied- NoPermissions20 Ke
Page 398 and 399:
CyberKey Communications LogThe Comm
Page 400 and 401:
4. Present the key to the IREncoder
Page 402 and 403:
RFID Access CardsCyberAudit-Web use
Page 404:
Steps to Assign an RFID Access Card
Page 407 and 408:
Schedule Access/ExpirationThe Acces
Page 409 and 410:
Add or Edit HolidaysEnter the holid
Page 411 and 412:
CyberAudit-Web Global SchedulesCybe
Page 413 and 414:
Adding SchedulesHolidays are "excep
Page 415 and 416:
Schedule Time FramesA schedule time
Page 417 and 418:
Matrix SymbolSchedules should be gi
Page 419 and 420:
Setting Schedules in the Access Mat
Page 421 and 422:
CyberAudit-Web Professional can aut
Page 423 and 424:
Reports, Notifications, and the Jou
Page 425 and 426:
ReportsPeople, events, dates and lo
Page 427 and 428:
Adding ReportsFollow these steps to
Page 429 and 430:
Report PropertiesReports may be cus
Page 431 and 432:
Included Locks and CyberPointsUse t
Page 433 and 434:
Edit Report EventsEvents refers to
Page 435 and 436:
Included ColumnsChanging options in
Page 437 and 438:
Event sorting in reportsThe order o
Page 439 and 440:
Notifications
Page 441 and 442:
Audit Trail EventsJournal of Change
Page 443 and 444:
Follow these steps to add notificat
Page 445 and 446:
Journal of Changes
Page 447 and 448:
Filter on what was changed permits
Page 449 and 450:
Details - The details button will b
Page 451 and 452:
Date/Time PreferencesDate order, se
Page 453 and 454:
Backup and RestoreTo create a new b
Page 455 and 456:
Using Locks and KeysThis section co
Page 457 and 458:
Standard CyberKey Battery Cap Remov
Page 459 and 460:
Beeper and LED Flash Patterns for C
Page 461 and 462:
How to manage Lithium-ion polymer b
Page 463 and 464:
CyberLock Cleaning InstructionsWith
Page 465 and 466:
CyberPoint User Tips1.2.3.4.5.6.Con
Page 467 and 468:
GlossaryAccess Code An access code
Page 469 and 470:
Control Key A type of CyberKey that
Page 471:
Portable Link A remote communicatio
show all

Reference Manual - Videx, Inc.

Create successful ePaper yourself

Delete template?

Save as template?