Concurrent I/O•Parameter - Motoman

1.13 Standard Ladder ProgramFormatWNOT S, DFunctionWNOT InstructionS: Source Register (M000-M161)Decimal (0-65535)Relay (byte) #XXX0Relay (word) W#XXX0D: Destination Register (M000-M099, M150-M161)Relay (byte) #XXX0Relay (word) W#XXX0Logical negation operation of S is performed and the result is output to D when the input signalis at ON state. The logic operation is performed in each correspondence bit of S1 and S2.DSS1 1100110011001100 Binary DataD 0011001100110011 Binary DataLadder Program ExampleNOTEThe output cannot be done to the same relay two or more times.The multiple outputs of the register used as a current position of the TMR instruction andthe CNT instruction cannot be used.#7010M000WNOTM010< Program>STR #7010WNOT M000,M0101-106