Concurrent I/O•Parameter - Motoman

1.15 How to Monitor SignalsI/O STATUS DISPLAYSignal status can be monitored by using input number (IN#) or output number (OUT#) in thedisplay. In addition, signal names can also be monitored.OperationSelect {DISP} under the menu.ExplanationSelect {DETAILS}.*1*1 The general output display is shown.DATA EDIT DISP UTILITYLGENERAL OUTPUT R1C SGROUP OG#01 123 : 10 DEC 7b : 16 DECOUT#001 #1010 [ ]OUT#002 #1011 [ ]OUT#003 #1012 [ ]OUT#004 #1013 [ ]OUT#005 #1014 [ ]OUT#006 #1015 [ ]OUT#007 #1016 [ ]OUT#008 #1017 [ ]!General Output Status : ON : OFFIn the general output status display, an output signal on/off status can be changed. Once thestatus is changed, that status is maintained unless the next output instruction is executed.OperationSelect the signal to be changed. *1Select the signal status.*2Explanation*1 In the general ouput display, move the cursor to the or of the signal status to bechanged.DATA EDIT DISP UTILITYLGENERAL OUTPUT R1C SGROUP OG#01 123:10 DEC7b:16 DECOUT#001 #1010 [ ]OUT#002 #1011 [ ]OUT#003 #1012 [ ]OUT#004 #1013 [ ]OUT#005 #1014 [ ]OUT#006 #1015 [ ]OUT#007 #1016 [ ]OUT#008 #1017 [ ]!1-179