Concurrent I/O•Parameter - Motoman

1.16 I/O Messages and I/O Alarms I/O Messages and I/O AlarmsRegistering the User SectionUser section I/O alarms and I/O messages can be displayed or registered in the managementmode by the following procedures:OperationSelect {I/O} under the top menu.Select {I/O ALARM} or {I/O MESSAGE}*1PressPAGE KEY . *2Explanation*1 The user section or the system section under the selected submenu (I/O Alarm or I/OMessage) is displayed.DATA EDIT DISP UTILITYI/O Message (User ) R1LC SNO.NAME0001:[ WIRE CUTTING COMPLETED ]0002:[ ]0003:[ ]0004:[ WIRE CUT START PROCESSING ]0005:[ ]0006:[ ]0007:[ ]0008:[ ]!*2 To change between the user section and the system section, use the PAGE KEY.DATA EDIT DISP UTILITYI/O Message (System) R1LC SNO.NAME0001:[ ]0002:[ WIRE STICKING ]0003:[ GAS CUTTING COMPLETED ]0004:[ ]0005:[ ]0006:[ ]0007:[ ]0008:[ ]!User section I/O alarms and I/O messages can be displayed or registered by the followingprocedures. However, the system I/O alarms and I/O messages cannot be edited.1-188