Cirrus SR2x

ENGINE INDICATION SYSTEM
SYSTEM DISPLAY
NOTE: Fuel calculations do not use the aircraft fuel quantity indicators and are calculated anytime the initial
usable fuel is changed.
NOTE: Refer to the Pilot’s Operating Handbook (POH) for limitations.
The EIS System Display shows the engine, fuel calculations, electrical, and various system parameters. Fuel
calculations are based on the displayed fuel remaining and the fuel flow totalizer.
Accessing the EIS System Display:
1) Press the ENGINE Softkey.
2) Press the SYSTEM Softkey.
3) To return to the default Engine Display, press the ENGINE or BACK Softkey.
1 Percent Power Indicator
(% Pwr)
Displays engine power as a percentage
2 Tachometer (RPM) Shows propeller speed in revolutions per minute
3 Engine Manifold Pressure
Indicator (Man “Hg)
4 Fuel Calculation Group
(Fuel Calc)
5 Electrical Group
(Electrical)
Displays manifold pressure in inches of Mercury to indicate engine
power
Displays calculated fuel at destination, fuel used, fuel remaining, time
remaining, range (in nautical miles) and economy (in nautical miles
per gallon) based on the displayed fuel remaining and the fuel flow
totalizer
Displays the alternator and battery current in amperes and the
essential and main bus voltage
6 Miscellaneous (Misc) Displays engine hours and anti-ice gallons (optional) and oxygen
pressure (optional)
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 107