Cirrus SR2x

HAZARD AVOIDANCE
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
CELL MOVEMENT
The Cell Movement weather product (Figure 6-20) shows the location and movement of storm cells as
identified by the ground-based system. Cells are represented by yellow squares, with direction of movement
indicated with short, orange arrows.
AUDIO PANEL
& CNS
EIS
Storm Cells
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
FLIGHT
MANAGEMENT
APPENDICES
Figure 6-20 Cell Movement Data
NOTE: The Storm Cell base height is not available if a GDL 69A SXM data link receiver is installed. In this
case, the Storm Cell base height is displayed as 0 feet when the map pointer selects a storm cell.
On most applicable maps, the Cell Movement weather product is selected for display along with NEXRAD.
On the Weather Data Link (XM) Page, Cell Movement can be selected independently.
Displaying Cell Movement information:
1) Press the MAP Softkey (for the PFD Inset Map, select the INSET Softkey). This step is not necessary on the
Weather Data Link (XM) Page.
2) Press the NEXRAD Softkey (CEL MOV Softkey on the Weather Data Link (XM) Page). For Cell Movement to
be displayed on maps other than the Weather Data Link (XM) Page, Cell Movement must be turned on in the
Navigation Map Setup Menu (see “Setting Up SiriusXM Weather”).
To display the Cell Movement legend on the Weather Data Link (XM) Page, (Figure 6-21), press the LEGEND
Softkey when Cell Movement is selected for display.
INDEX
Figure 6-21 Cell Movement Legend
340
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A