Cirrus SR2x

FLIGHT MANAGEMENT
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
Adding a waypoint to the active flight plan using the Quick Select Box:
1) Press the FPL Key.
2) Use the Joystick to position the Quick Select Box and the associated Insertion Point Indicator at the location to
insert the waypoint.
3) Enter the identifier, facility, or city name of the waypoint using the alphanumeric keys on the PFD/MFD Control
Unit and press the ENT Key. The active flight plan is modified as each waypoint is entered.
Creating and adding user waypoints to the active flight plan:
1) Press the Joystick to activate the panning function on the Active Flight Plan Page and pan to the map location
of the desired user waypoint.
2) Press the LD WPT Softkey; or press the MENU Key, select ‘Load Waypoint’, and press the ENT Key. The user
waypoint is created with a name of USRxxx (using the next available in sequence) and is added to the end of
the active flight plan.
ADDING AIRWAYS TO A FLIGHT PLAN
Airways can be added to the active flight plan or any stored flight plan. Choose a flight plan (add the desired
airway entry point if not already in the flight plan), select the waypoint after the desired airway entry point,
select the airway, and it is added in front of the selected waypoint. An airway can only be loaded if there is a
waypoint in the flight plan that is part of the desired airway and is not part of an arrival or approach procedure.
Perspective also anticipates the desired airway and exit point based on loaded flight plan waypoints.
HAZARD
AVOIDANCE
Selected Airway
Airway Entry Waypoint
Airways Available at TOP
AFCS
Preview of
Selected Airway
Airway Waypoint
Sequence
APPENDICES
INDEX
ADDITIONAL
FEATURES
Figure 5-65 Select Airway Page - Selecting Airway
232
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A