03.05.2016 Views

Cirrus SR2x

fV4OKB

fV4OKB

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

FLIGHT MANAGEMENT<br />

SYSTEM<br />

OVERVIEW<br />

FLIGHT<br />

INSTRUMENTS<br />

EIS<br />

entered from 1 to 999 nm in increments of 1 nm. Entering a negative offset distance results in an along track<br />

offset waypoint inserted before the selected waypoint, whereas entering a positive offset distance results in an<br />

along track offset waypoint inserted after the selected waypoint. Multiple offset waypoints are allowed.<br />

A waypoint must be adjacent to its parent waypoint in the flight plan, so the system limits the along-track<br />

distance to less than the length of the leg before or after the selected waypoint. If the selected waypoint is the<br />

active waypoint, the distance is limited to less than the distance to go to the active waypoint. Assigning an along<br />

track offset to a leg with indeterminate length is not permitted. An along track offset is not allowed at or after<br />

the final approach fix of an approach.<br />

An along track offset distance cannot be modified once entered. If the along track offset distance must be<br />

changed, the existing along track offset waypoint must be deleted and a new one created with the new offset<br />

distance.<br />

FLIGHT<br />

MANAGEMENT<br />

HAZARD<br />

AVOIDANCE<br />

AFCS<br />

ADDITIONAL<br />

FEATURES<br />

AUDIO PANEL<br />

& CNS<br />

Along Track<br />

Offset Waypoint<br />

and Distance<br />

Along Track Offset<br />

Waypoint and<br />

Distance from Flight<br />

Plan Waypoint<br />

Figure 5-79 Along Track Offset<br />

APPENDICES<br />

INDEX<br />

Entering an along track offset distance:<br />

1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).<br />

2) Press the FMS Knob to activate the cursor (not required on the PFD) and turn the large FMS Knob to highlight<br />

the waypoint for the along track offset.<br />

3) Press the ATK OFST Softkey (MFD only); or press the MENU Key, highlight ‘Create ATK Offset Waypoint’, and<br />

press the ENT Key.<br />

4) Enter a positive or negative offset distance in the range of +/- 1 to 999 nm (limited by leg distances).<br />

5) Press the ENT Key to create the offset waypoint.<br />

6) Press the FMS Knob to remove the flashing cursor.<br />

248<br />

Pilot’s Guide for the <strong>Cirrus</strong> <strong>SR2x</strong> with <strong>Cirrus</strong> Perspective by Garmin<br />

190-00820-11 Rev. A

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!