Cirrus SR2x

FLIGHT MANAGEMENT
SYSTEM
OVERVIEW
21) Upon passing PYNON the approach procedure automatically becomes active. The approach may be activated
at any point to proceed directly to the IAF. In this example, the aircraft has progressed through the final
waypoint of the arrival and the flight plan has automatically sequenced to the IAF as the active leg, activating
the approach procedure (see Figure 5-145).
INDEX
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
ADDITIONAL
FEATURES
AUDIO PANEL
& CNS
EIS
FLIGHT
INSTRUMENTS
Figure 5-145 Approach is Now Active
AFCS
Note: To manually activate the approach procedure, perform the following steps:
a) Press the PROC Key.
b) Turn the large FMS Knob to highlight ‘ACTIVATE APPROACH’ as shown in Figure 5-146.
c) Press the ENT Key to activate the approach.
APPENDICES
Figure 5-146 Manually Activate Approach
312
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A