03.05.2016 Views

Cirrus SR2x

fV4OKB

fV4OKB

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

AUDIO PANEL AND CNS<br />

INTERCOM VOLUME AND SQUELCH<br />

Two volume controls, one for the pilot and a combined copilot/passenger control, set intercom audio level.<br />

Each microphone input has an automatic squelch threshold. Manual squelch is available by pressing the<br />

Pilot side VOL/SQ knob. When the MAN SQ annunciation is lit the large squelch knobs control pilot and<br />

copilot/passenger squelch threshold. Turning either knob clockwise increases the squelch threshold level.<br />

Turning either knob counterclockwise decreases the squelch threshold level.<br />

When the MAN SQ annunciation is not lit, squelch is automatic and the large squelch knobs have no<br />

function.<br />

Manual Squelch Annunciation;<br />

Off for Automatic Squelch, On<br />

for Manual Squelch<br />

SYSTEM<br />

OVERVIEW<br />

FLIGHT<br />

INSTRUMENTS<br />

EIS<br />

Rotating the Pilot Volume Knob<br />

controls ON and OFF function.<br />

(Full CCW detent is OFF)<br />

Pressing the Pilot volume knob<br />

switches between manual and<br />

automatic squelch.<br />

Pulling the right volume<br />

knob controls passenger<br />

volume, pushing in controls<br />

Copilot volume. Copilot and<br />

passenger share the large<br />

squelch knob.<br />

AUDIO PANEL<br />

& CNS<br />

Pilot Volume, On/Off, and Manual Squelch<br />

Figure 4-55 Intercom Volume and Squelch Controls<br />

Copilot/Passenger Volume and Manual Squelch<br />

FLIGHT<br />

MANAGEMENT<br />

HAZARD<br />

AVOIDANCE<br />

AFCS<br />

ADDITIONAL<br />

FEATURES<br />

APPENDICES INDEX<br />

190-00820-11 Rev. A Pilot’s Guide for the <strong>Cirrus</strong> <strong>SR2x</strong> with <strong>Cirrus</strong> Perspective by Garmin 153

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!