Cirrus SR2x

HAZARD AVOIDANCE
EIS
FLIGHT
INSTRUMENTS
SYSTEM
OVERVIEW
Figure 6-140 Navigation Map Page Menu
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES
AUDIO PANEL
& CNS
INDEX
Figure 6-141 Navigation Map Page Setup Menu
TERRAIN-SVS PAGE
Figure 6-142 Navigation Map Page Setup Menu, Map Group
The Map - Terrain-SVS Page is the principal map page for viewing terrain, obstacle, and potential impact
point data in relation to the aircraft’s current altitude, without clutter from the basemap. Aviation information
(airports, VORs, and other NAVAIDs) can be displayed for reference. If an obstacle and the projected flight
path of the aircraft intersect, the display automatically zooms in to the closest potential point of impact on the
Terrain-SVS Page.
Aircraft orientation on this map is always heading up unless there is no valid heading. Two views are available
relative to the position of the aircraft: the 360° default display and the radar-like ARC (120°) display. Map range
is adjustable with the Joystick from 1 to 200 nm, as indicated by the map range rings (or arcs).
Displaying the Terrain-SVS Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Terrain-SVS Page.
Changing the Terrain-SVS Page view:
1) Press the VIEW Softkey.
2) Press the 360 or ARC Softkey to select the desired view.
Or:
1) Press the MENU Key.
2) Select ‘View Arc’ or ‘View 360º’ (choice dependent on current state) and press the ENT Key to change the view
426
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A