Cirrus SR2x

HAZARD AVOIDANCE
Additional information about obstacles can be displayed by panning over the display on the map. The map
panning feature is enabled by pressing the Joystick. The map range is adjusted by turning the Joystick. If the
map range is adjusted while panning is enabled, the map is re-centered on the Map Pointer.
SYSTEM
OVERVIEW
Additional
Information on
Obstacle Selected
with Map Pointer
Yellow Terrain Area
(Between 100’ and
1000’ Below Aircraft
Altitude)
Lighted Obstacle
Selected with Map
Pointer
Red Terrain Area
(Above or Within
100’ Below
Aircraft Altitude)
Red Lighted
Obstacles
(Above or Within
100’ Below
Aircraft Altitude)
Terrain Display
Enabled Icon
Terrain Legend
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
TERRAIN PROXIMITY PAGE
Figure 6-136 Terrain Information on the Navigation Map Page
The Map - Terrain Proximity Page is the principal map page for showing terrain and obstacle data in relation
to the aircraft’s current altitude, without clutter from the basemap. Aviation information (airports, VORs, and
other NAVAIDs) can be displayed for reference.
Aircraft orientation on this map is always heading up unless there is no valid heading. Two views are available
relative to the position of the aircraft: the 360° default display and the radar-like ARC (120°) display. Map range
is adjustable with the Joystick from 1 to 200 nm, as indicated by the map range rings (or arcs).
Displaying the Terrain Proximity Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Terrain Proximity Page.
3) To change the view,
a) Press the VIEW Softkey.
b) Press the 360 or ARC Softkey to select the desired view.
Or:
a) Press the MENU Key.
b) Select ‘View Arc’ or ‘View 360º’ (choice dependent on current state) and press the ENT Key to change the view.
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 421