Cirrus SR2x

AUDIO PANEL AND CNS
SYSTEM
OVERVIEW
Pilot Volume and
Manual Squelch
Automatic/Manual
Squelch Annunciation
Pilot and
Copilot ICS
Isolation Keys
Copilot/Passenger Volume
and Manual Squelch
FLIGHT
INSTRUMENTS
Figure 4-58 Audio Panel Preflight Controls
EIS
Setting the Audio Panel during preflight:
1) Verify that the PILOT and COPLT Annunciators are extinguished.
2) Verify that manual squelch is set to full open.
3) Turn the PILOT Knob and COPILOT Knob fully clockwise. This will set the headset intercom audio level to max
volume (least amount of attenuation).
4) Adjust radio volume levels (COM, NAV, etc.) to a suitable level.
5) Adjust the PILOT Knob and COPILOT Knob volume to the desired intercom level.
6) Reset squelch to automatic, or adjust to the appropriate level manually.
Once this procedure has been completed, the pilot and copilot can change settings, keeping in mind the notes
above.
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 159