Cirrus SR2x

ADDITIONAL FEATURES
SYSTEM
OVERVIEW
c) Press the ENT Key. The PREDEFINED SMS TEXT MESSAGE Window is now displayed as shown in Figure 8-110.
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES
INDEX
AUDIO PANEL
& CNS
EIS
FLIGHT
INSTRUMENTS
Figure 8-110 Composing a Predefined Message
5) The cursor is displayed in the ‘TITLE’ field. Enter the desired message title. Entry can be accomplished through
the alphanumeric keys on the MFD Controller, or combination of the FMS Knob on the controller and softkeys
on the MFD. The FMS Knob is used to enter letters and numbers, or numbers can be entered from the MFD
by selecting the NUMBERS Softkey. Select the CAP LOCK Softkey to create upper and lower case alpha
characters. Special characters can be accessed by selecting the SYMBOLS Softkey.
6) Press the ENT Key. The cursor is now displayed in the ‘MESSAGE’ field.
7) Enter the desired message using any combination of entry methods as described in step 5.
8) Press the ENT Key.
9) Select the SAVE Softkey. The new predefined message is now shown in the displayed list. Selecting the
CANCEL Softkey will delete the message without saving.
10) Press the MENU Key to display the Page Menu.
11) Turn either FMS Knob to place the cursor on ‘Stop Editing Predefined Message’.
12) Press the ENT Key.
Sending a predefined text message:
1) While viewing the AUX-TEXT MESSAGING Page, select the NEW Softkey.
2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the ‘TO’ field. Enter the desired
telephone number or email address. Entry can be accomplished through the alphanumeric keys on the MFD
Controller, or combination of the FMS Knob on the controller and softkeys on the MFD. The FMS Knob is used
to enter letters and numbers, or numbers can be entered from the MFD by selecting the NUMBERS Softkey.
634
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A