Cirrus SR2x

HAZARD AVOIDANCE
6) Enter the access code provided by Garmin customer service in the ACCESS CODE field.
7) Press the ENT Key. ‘REGISTER’ will now be highlighted as in Figure 6-56.
8) Press the ENT Key. The system contacts Garmin Connext services. System registration is complete when
‘REGISTERED’ is displayed in the STATUS field.
Weather
product age
information
Precip Weather
Product Display
Enabled icon
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
Precip Weather
Product Selected
for Display
Figure 6-57 Weather Data Link (CNXT) Page
(After Connext Data Request)
HAZARD
AVOIDANCE
When a weather product is selected for display on the Weather Data Link (CNXT) Page, a box containing a
symbol for the product and its age (in minutes) are shown in the upper right (Figure 6-57). If weather data has
not been requested yet or is not available, ‘N/A’ is shown next to the product symbol instead of age. The age of
the weather product is based on the time difference between when the data was assembled on the ground and
the current GPS time. Weather products are updated continuously or refreshed at specific intervals (defined in
the Refresh Rate column in Table 6-4).
If for any reason, a weather product is not refreshed within the defined Expiration Time intervals (see Table
6-4), the data is considered expired and is removed from the display. The age of the expired product is replaced
by dashes. If more than half of the expiration time has elapsed, the color of the product age changes to amber.
Table 6-4 shows the Garmin Connext weather product symbols, the expiration time and the refresh rates. The
refresh rate represents the interval at which the Garmin Connext ground-based servers make available the most
current known weather data. It does not necessarily represent the rate at which new content is received from
weather sources.
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 361