03.05.2016 Views

Cirrus SR2x

fV4OKB

fV4OKB

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FLIGHT MANAGEMENT<br />

Viewing runway information for a specific airport:<br />

1) With the Nearest Airports Page displayed, press the RNWY Softkey; or press the MENU Key, highlight ‘Select<br />

Runway Window’; and press the ENT Key. The cursor is placed in the ‘RUNWAYS’ Box.<br />

2) Turn the small FMS Knob to select the desired runway.<br />

3) Press the FMS Knob to remove the flashing cursor.<br />

See the Audio Panel and CNS Section for frequency selection and the Procedures section for approaches.<br />

The Nearest Airports Box on the System Setup Page defines the minimum runway length and surface type<br />

used when determining the 25 nearest airports to display on the MFD Nearest Airports Page. A minimum<br />

runway length and/or surface type can be entered to prevent airports with small runways or runways that are<br />

not appropriately surfaced from being displayed. Default settings are 0 feet (or meters) for runway length and<br />

“HARD/SOFT” for runway surface type.<br />

Selecting nearest airport surface matching criteria:<br />

1) Use the FMS Knob to select the System Setup Page.<br />

2) Press the FMS Knob momentarily to activate the flashing cursor.<br />

3) Turn the large FMS Knob to highlight the runway surface field in the Nearest Airports Box.<br />

4) Turn the small FMS Knob to select the desired runway option (ANY, HARD ONLY, HARD/SOFT).<br />

5) Press the ENT Key.<br />

6) Press the FMS Knob to remove the flashing cursor.<br />

Selecting nearest airport minimum runway length matching criteria:<br />

1) Use the FMS Knob to select the System Setup Page.<br />

2) Press the FMS Knob momentarily to activate the flashing cursor.<br />

3) Turn the large FMS Knob to highlight the minimum length field in the Nearest Airport Box.<br />

4) Use the FMS Knob to enter the minimum runway length (zero to 25,000 feet) and press the ENT Key.<br />

5) Press the FMS Knob to remove the flashing cursor.<br />

SYSTEM<br />

OVERVIEW<br />

FLIGHT<br />

INSTRUMENTS<br />

EIS<br />

AUDIO PANEL<br />

& CNS<br />

FLIGHT<br />

MANAGEMENT<br />

HAZARD<br />

AVOIDANCE<br />

AFCS<br />

ADDITIONAL<br />

FEATURES<br />

Nearest Airport Criteria<br />

- Type of Runway Surface<br />

- Minimum Runway Length<br />

Figure 5-39 System Setup Page - Nearest Airport Selection Criteria<br />

APPENDICES INDEX<br />

190-00820-11 Rev. A Pilot’s Guide for the <strong>Cirrus</strong> <strong>SR2x</strong> with <strong>Cirrus</strong> Perspective by Garmin 199

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!