Cirrus SR2x

HAZARD AVOIDANCE
Traffic Map Page Display Range
The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
Joystick, as indicated by the map range rings.
Changing the display range on the Traffic Map Page:
1) Turn the Joystick
2) The following range options are available:
• 2 nm
• 2 and 6 nm
• 6 and 12 nm
ADDITIONAL TRAFFIC DISPLAYS
The Traffic Map Page is the principal map page for viewing traffic information. Traffic information is also
available on the following other MFD maps and pages as an additional reference to the Traffic Map Page:
• Navigation Map Page
• Nearest Pages
• Trip Planning Page
• AUX - Video Page
• Active Flight Plan Page
Traffic information can also be displayed on the PFD when the Synthetic Vision Technology (SVT) system
option is installed and enabled. See the Additional Features Section for details.
Displaying traffic information (MFD maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map.
When traffic is selected on naivgiation maps, a traffic icon is shown to indicate traffic is enabled for display
(Table 6-31).
Displaying traffic on the Navigation Map:
1) Ensure the TAS system is operating. With the Navigation Map displayed, select the MAP Softkey.
2) Select the TRAFFIC Softkey. Traffic is now displayed on the map as shown in Figure 6-177.
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 459