Cirrus SR2x

SYSTEM OVERVIEW
Or:
a) Press the MENU Key.
b) Turn the FMS Knob to highlight ‘Import Pilot Profile’ and press the ENT Key.
4) The system displays the Pilot Profile Importing window with ‘IMPORT’ highlighted. To change the selected
profile to be imported from the SD card (shown as ‘SELECT FILE’), turn the large FMS Knob to highlight the
profile file name, then turn the small FMS Knob to highlight a profile from the list, and press the ENT Key.
5) If desired, the profile name to be used after profile has been imported can be changed by turning the FMS
Knob to highlight the ‘PROFILE NAME’ field, then use the large and small FMS Knobs to enter the name, and
press the ENT Key. Imported profile names cannot begin with a blank space or be named ‘DEFAULT’, ‘GARMIN
DEFAULTS’ or ‘DEFAULT SETTINGS’.
6) With ‘IMPORT’ highlighted, press the ENT Key.
7) If the imported profile name is the same as an existing profile on the system, the system displays an ‘Overwrite
existing file? OK or CANCEL’ prompt. Press the ENT Key to replace profile on the system with the profile
imported from the SD card, or turn the FMS Knob to highlight ‘CANCEL’ and press the ENT Key to return to the
Pilot Profile Importing window.
8) If successful, the system displays ‘Pilot profile import succeeded.’ in the IMPORT RESULTS window below. With
‘OK’ highlighted, press the ENT or CLR Keys or press the FMS Knob to return to the AUX - System Setup Page.
The imported profile becomes the active profile.
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
Pilot Profile Importing and Import
Results Window
Pilot Profiles Available for Import from
SD Card (‘STEVE’S PROFILE’ Selected)
Figure 1-37 Pilot Profile Import (AUX - System Setup Page)
Import Successful
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 49