Cirrus SR2x

HAZARD AVOIDANCE
SYSTEM
OVERVIEW
SYSTEM STATUS
The traffic mode is annunciated in the upper left corner of the Traffic Map Page.
FLIGHT
INSTRUMENTS
Traffic Mode
TAS System Test
Initiated
Traffic Mode Annunciation
(Traffic Map Page)
TEST
(also shown in white in center of page)
Traffic Display Status Icon
(Other Maps)
TAS Operating
OPERATING
EIS
TAS Standby
STANDBY
(also shown in white in center of page)
TAS Failed*
FAIL
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
* See Table 6-32 for additional failure annunciations
Table 6-31 TAS Modes
If the traffic unit fails, an annunciation as to the cause of the failure is shown in the center of the Traffic Map
Page. During a failure condition, the Operating Mode cannot be selected.
Traffic Map Page
Annunciation
NO DATA
DATA FAILED
FAILED
Description
Data is not being received from the TAS unit
Data is being received from the TAS unit, but the
unit is self-reporting a failure
Incorrect data format received from the TAS unit
Table 6-32 TAS Failure Annunciations
AFCS
ADDITIONAL
FEATURES
APPENDICES
INDEX
The annunciations to indicate the status of traffic information appear in a banner at the lower left corner of
maps on which traffic can be displayed.
Traffic Status Banner
Annunciation
TA OFF SCALE
TA X.X ± XX ↕
TRFC FAIL
NO TRFC DATA
*Shown as symbol on Traffic Map Page
**Shown in center of Traffic Map Page
Description
A Traffic Advisory is outside the selected display range*.
Annunciation is removed when traffic comes within the
selected display range.
System cannot determine bearing of Traffic Advisory**.
Annunciation indicates distance in nm, altitude separation
in hundreds of feet, and altitude trend arrow (climbing/
descending).
TAS unit has failed (unit is self-reporting a failure or
sending incorrectly formatted data)
Data is not being received from the TAS unit
Table 6-33 TAS Traffic Status Annunciations
462
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A