03.05.2016 Views

Cirrus SR2x

fV4OKB

fV4OKB

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

FLIGHT MANAGEMENT<br />

Adding an airway to a flight plan using the FMS Knob:<br />

1) Press the FPL Key.<br />

2) Press the FMS Knob to activate the cursor (not required on the PFD).<br />

3) Turn the large FMS Knob to highlight the waypoint after the desired airway entry point. If this waypoint is not<br />

a valid airway entry point, a valid entry point should be entered at this time.<br />

4) Turn the small FMS Knob one click clockwise and press the LD AIRWY Softkey, or press the MENU Key and<br />

select “Load Airway”. The Select Airway Page is displayed. The LD AIRWY Softkey or the “Load Airway” menu<br />

item is available only when a valid airway entry waypoint has been chosen (the waypoint ahead of the cursor<br />

position).<br />

5) Turn the FMS Knob to select the desired airway from the list, and press the ENT Key. Low altitude airways are<br />

shown first in the list, followed by “all” altitude airways, and then high altitude airways.<br />

6) Turn the FMS Knob to select the desired airway exit point from the list, and press the ENT Key. ‘LOAD?’ is<br />

highlighted.<br />

7) Press the ENT Key. The system returns to editing the flight plan with the new airway inserted.<br />

Adding an airway to a flight plan using the Quick Select Box:<br />

1) Press the FPL Key.<br />

2) Use the Joystick to place the QuickSelect Box on the waypoint after the desired airway entry point. If this<br />

waypoint is not a valid airway entry point, a valid entry point should be entered at this time.<br />

3) Press the MENU Key and select “Load Airway”. The Select Airway Page is displayed.<br />

4) Turn the FMS Knob to select the desired airway from the list, and press the ENT Key. Low altitude airways are<br />

shown first in the list, followed by “all” altitude airways, and then high altitude airways.<br />

5) Turn the FMS Knob to select the desired airway exit point from the list, and press the ENT Key. ‘LOAD?’ is<br />

highlighted.<br />

6) Press the ENT Key. The system returns to editing the flight plan with the new airway inserted.<br />

SYSTEM<br />

OVERVIEW<br />

FLIGHT<br />

INSTRUMENTS<br />

EIS<br />

AUDIO PANEL<br />

& CNS<br />

FLIGHT<br />

MANAGEMENT<br />

HAZARD<br />

AVOIDANCE<br />

AFCS<br />

ADDITIONAL<br />

FEATURES<br />

APPENDICES INDEX<br />

190-00820-11 Rev. A Pilot’s Guide for the <strong>Cirrus</strong> <strong>SR2x</strong> with <strong>Cirrus</strong> Perspective by Garmin 233

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!