03.05.2016 Views

Cirrus SR2x

fV4OKB

fV4OKB

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

HAZARD AVOIDANCE<br />

EXCESSIVE DESCENT RATE ALERT<br />

The purpose of the Excessive Descent Rate (EDR) alert is to provide notification when the aircraft is<br />

determined to be closing (descending) upon terrain a rate that is calculated to be excessive relative to height<br />

above terrain. Figure 6-157 shows the parameters for the alert as defined by TSO-C151b.<br />

6000<br />

5500<br />

5000<br />

SYSTEM<br />

OVERVIEW<br />

FLIGHT<br />

INSTRUMENTS<br />

Height Above Terrain (Feet)<br />

4500<br />

4000<br />

3500<br />

3000<br />

2500<br />

2000<br />

1500<br />

1000<br />

Caution: “SINK RATE”<br />

Warning: “PULL UP”<br />

EIS<br />

AUDIO PANEL<br />

& CNS<br />

500<br />

0<br />

0<br />

1000<br />

2000<br />

3000<br />

4000<br />

5000<br />

6000<br />

7000<br />

8000<br />

9000<br />

Descent Rate (FPM)<br />

Figure 6-157 Excessive Descent Rate Alert Criteria<br />

10000<br />

11000<br />

12000<br />

FLIGHT<br />

MANAGEMENT<br />

FORWARD LOOKING TERRAIN AVOIDANCE<br />

The Forward Looking Terrain Avoidance (FLTA) feature of TAWS-B compares the projected flight path as<br />

derived from GPS data with terrain features and obstacles from the terrain and obstacle databases. The system<br />

issues visual and voice alerts when the projected flight path conflicts with terrain or obstacles.<br />

The projected flight path is a calculated area ahead of, to the sides, and below the aircraft. The size of<br />

the projected flight path varies based on factors including ground speed (the path ahead is larger when the<br />

ground speed is higher), whether the aircraft is level, turning, or descending, and the proximity to the nearest<br />

runway along the current track. As the aircraft approaches the runway, the projected flight path becomes<br />

narrower until the system automatically disables FLTA alerts or the pilot manually inhibits them.<br />

There are two types of FLTA alerts, Reduced Required Terrain/Obstacle Clearance (RTC or ROC respectively)<br />

and Imminent Terrain/Obstacle Impact (ITI or IOI respectively).<br />

Reduced Required Terrain Clearance (RTC) and Reduced Required Obstacle Clearance (ROC)<br />

alerts are issued when the aircraft flight path is above terrain, yet is projected to come within the minimum<br />

clearance values in Figure 6-158. When an RTC alert is issued, a potential impact point is displayed on the<br />

TAWS-B Page.<br />

Imminent Terrain Impact (ITI) and Imminent Obstacle Impact (IOI) alerts are issued when the<br />

aircraft is below the elevation of a terrain or obstacle in the aircraft’s projected path. ITI and IOI alerts are<br />

accompanied by a potential impact point displayed on the TAWS-B Page. The alert is annunciated when the<br />

projected vertical flight path is calculated to come within minimum clearance altitudes in Figure 6-158.<br />

HAZARD<br />

AVOIDANCE<br />

AFCS<br />

ADDITIONAL<br />

FEATURES<br />

APPENDICES INDEX<br />

190-00820-11 Rev. A Pilot’s Guide for the <strong>Cirrus</strong> <strong>SR2x</strong> with <strong>Cirrus</strong> Perspective by Garmin 439

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!