Cirrus SR2x

FLIGHT MANAGEMENT
If the parallel track proposed by the offset direction and distance is not allowed by the system, the activation
prompt is displayed, but disabled. Parallel Track cannot be activated if a course is set using direct-to or if the
active leg is the first leg of the departure procedure. Attempting to activate parallel track with these conditions
results in the message ‘Parallel Track Unavailable Invalid Route Geometry’. If an approach leg is active the status
indicates that the system is unable to activate the parallel track with the message ‘Parallel Track Unavailable
Approach Leg Active’. If the offset direction and distance results in an unreasonable route geometry the status
indicates that the system is unable to activate the parallel track because of invalid geometry.
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
Subdued Prompt
(Unavailable)
Unavailable Status
Invalid Approach
Geometry Active
AUDIO PANEL
& CNS
Figure 5-83 Parallel Track Unavailable
If the active leg is not a track between two fixes (TF) or a course to a fix (DF) leg, the status
indicates that the system is unable to activate the parallel track because parallel track is not available for the
active leg type.
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
Cancel Prompt
Offset Direction &
Distance Subdued
(Unavailable)
AFCS
Active Status
ADDITIONAL
FEATURES
Cancelling parallel track:
Figure 5-84 Cancelling Parallel Track
1) Press the FPL Key to display the Active Flight Plan Page (MFD) or the Active Flight Plan Window (PFD).
2) Press the MENU Key, highlight ‘Parallel Track’, and press the ENT Key. The Parallel Track Window is displayed
with ‘CANCEL PARALLEL TRACK?’ highlighted.
3) Press the ENT Key.
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 251