Cirrus SR2x

HAZARD AVOIDANCE
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
Arrows pointing to the left indicate headwind components; tailwind component arrows point to the right,
as shown in Table 6-7.
Headwind
Symbol
Tailwind
Symbol
Headwind/Tailwind
Component
None None Less than 5 knots
5 knots
EIS
10 knots
50 knots
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES
Table 6-7 Profile View Headwind/Tailwind Component Symbols
Showing/Hiding Profile View (containing winds aloft data)
1) Select the Navigation Map Page.
2) Select the MAP Softkey.
3) Select the PROFILE Softkey.
Or:
1) Select the Navigation Map Page
2) Press the MENU Key.
3) Turn the large FMS Knob to highlight ‘Show Profile View’ or ‘Hide Profile View’ (choice dependent on current
state) and press the ENT Key.
Winds Aloft data inside the Profile View is enabled by default when the Profile View is displayed on the
Navigation Map Page. This behavior can be changed on the Navigation Map Page.
Enabling/disabling winds aloft data display in Profile View:
1) Select the Navigation Map Page.
2) Press the MENU Key.
3) With Map Setup highlighted, press the ENT Key (Figure 6-84).
4) Turn the small FMS Knob to select the Profile Group and press the ENT Key (Figure 6-85).
5) Turn the large FMS Knob to select ‘Profile Winds’ (Figure 6-86).
6) Turn the small FMS Knob to select ‘On’ or ‘Off’.
7) Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.
INDEX
382
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A