Cirrus SR2x

ADDITIONAL FEATURES
2) Turn the small FMS Knob to select ‘AUTO’ for automatic transmission of position reports or ‘OFF’ to disable
transmission of position reports.
3) Press the ENT Key. The selection is entered and the cursor is placed in the TRANSMISSION RATE field.
4) Turn the small FMS Knob to highlight the first digit, as shown in Figure 8-136.
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
Figure 8-136 Set Transmission Rate
5) Again, turn the small FMS Knob to enter the desired number.
6) Turn the large FMS Knob to highlight the second digit.
7) Turn the small FMS Knob to enter the desired number.
8) Press the ENT Key. The selection is entered and the cursor is placed in the PASSENGERS ON BOARD field.
9) Turn the small FMS Knob left or right to select ‘YES’ or ‘NO’, as shown in Figure 8-137.
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
Figure 8-137 Set Transmission Rate
10) Press the FMS Knob to remove the cursor.
To send a position report manually:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select AUX-CONNEXT Page.
3) If necessary, set the TRANSMISSION PERIOD to 'AUTO'.
4) Press the SEND RPT Softkey, as seen in Figure 8-134.
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 661