Cirrus SR2x

SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
Setting the departure timer starting criterion:
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the field next to the departure time.
4) Turn the small FMS Knob to select the starting criterion (PWR-ON or IN-AIR) and press the ENT Key.
Resetting the departure time:
1) Use the FMS Knob to select the AUX - Utility Page.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight ‘Reset Departure Time’ and press the ENT Key.
GPS POSITION
The Timer/References Window on the PFD shows the current GPS position at the bottom of the window
using the selected display format (HHDDºMM.MM’ or HDDDºMM’SS.S”).
PFD
HAZARD
AVOIDANCE
AFCS
Figure 1-42 GPS Position (Timer/References Window)
GPS Position
ADDITIONAL
FEATURES
APPENDICES
INDEX
Viewing the GPS Position in the Timer/References Window:
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob until the ‘POSITION’ field appears.
3) To remove the Timer/References Window, press the TMR/REF Softkey or press the CLR Key.
Changing the GPS Position display format:
1) On the MFD, turn the FMS Knob to select the AUX - System Setup 1 Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the ‘POSITION’ field in the Display Units Window.
4) Turn the small FMS Knob to highlight the desired selection (HHDDºMM.MM’ or HDDDºMM’SS.S”) and press the
ENT Key.
54
Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin
190-00820-11 Rev. A