Cirrus SR2x

HAZARD AVOIDANCE
• FPL – Requests data along an active flight plan, if one exists. Turn the small FMS Knob to select the desired
flight plan look-ahead distance option (or choose ‘REMAINING FPL’ to request the remainder of the flight
plan), then press the ENT Key.
• WAYPOINT – Requests data based on a waypoint (which may be off-route). Turn the large and small FMS
Knobs to enter a waypoint, then press the ENT Key.
5) Turn the large FMS Knob highlight to the ‘DIAMETER / RTE WIDTH’ (diameter/route width) distance field and
turn the small FMS Knob to select the desired diameter and route width of the request, then press the ENT Key.
6) Turn the large FMS Knob until the ‘SEND REQ’ button is highlighted. Press the ENT Key to initiate the request
immediately or press the FMS Knob to return to the Weather Data Link (CNXT) Page without requesting
weather data.
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
Figure 6-65 Weather Data Link (CNXT) Page Menu
HAZARD
AVOIDANCE
AFCS
Figure 6-66 Connext Data Request Window
ADDITIONAL
FEATURES
APPENDICES INDEX
190-00820-11 Rev. A Pilot’s Guide for the Cirrus SR2x with Cirrus Perspective by Garmin 369