05.01.2013 Views

R. Meyer J. Köhler A. Homburg Explosives

R. Meyer J. Köhler A. Homburg Explosives

R. Meyer J. Köhler A. Homburg Explosives

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Channel Effect<br />

Channel Effect<br />

Kanaleffekt<br />

Interruption in the detonation of an explosive column because of the<br />

compaction of the cartridges which have not yet exploded due to the<br />

gas shock wave front in the borehole. This happens very often if the<br />

borehole cross-section is large as compared to that of the cartridges.<br />

Chlorate <strong>Explosives</strong><br />

Chloratsprengstoffe; explosifs chloratés<br />

Explosive mixtures of alkali metal chlorates with carbon-rich organic<br />

compounds such as wood dust, petroleum, oils, fats and nitro derivatives<br />

of benzene and toluene; they may also contain nitrate esters.<br />

Their strength is lower than that of ammonium nitrate explosives in<br />

powder form. Chlorate explosives must not be stored together with<br />

ammonium nitrate explosives, since ammonium chlorate, which is<br />

formed when these two substances are brought into contact, decomposes<br />

and explodes.<br />

“Miedziankit” is the name of absorbent potassium chlorate particles,<br />

which are impregnated with a liquid fuel just before use, and then<br />

acquire explosive properties. Following the development of W ANFO,<br />

this explosive is no longer of interest.<br />

Cigarette-Burning<br />

Stirnabbrand; combustion en cigarette<br />

W Face Burning<br />

Circuit Tester (Ohmmeter)<br />

Zündkreisprüfer; éprouveur; blasting galvanometer<br />

Instrument for electrical testing of misconnected circuits. The current<br />

intensity used in the testing must be well below the W No Fire condition<br />

of the electric detonator; the circuit tester is accordingly equipped<br />

with resistances at both poles. Only officially approved testers should<br />

be employed. The testers are of two kinds: conduction testers which<br />

show, by means of a visual indicator, whether or not current is flowing<br />

in the circuit, and ohmmeters which measure the resistance of the<br />

priming circuit.<br />

58

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!