Carbon Nanotube Reinforced Composites: Metal and Ceramic ...

composite. Materials Science and
Engineering A, 284, 70–76.
75 Tjong, S.C. and Wang, G.S. (2006) Lowcycle
fatigue behavior of in-situ TiB2/Cu
composite prepared by reactive hot
pressing. Journal of Materials Science, 41,
5263–5268.
76 Chang, S.Y. and Lin, S. (1996) J.
fabrication of SiCw reinforced copper
matrix composite by electrodeless
copper plating. Scripta Materialia, 35,
225–231.
77 Yih, P. and Chung, D.D. (1996) Silicon
carbide whisker copper-matrix
composites fabricated by hot pressing
copper coated whiskers. Journal of
Materials Science, 31, 399–406.
78 Lee, Y.F., Lee, S.L., Chuang, C.L. and Lin,
J.C. (1999) Effect of SiC p reinforcement by
electrodeless copper plating on properties
of Cu/SiCp composites. Powder
Metallurgy, 42, 147–152.
79 Zhang, R., Gao, L. and Guo, J. (2004)
Preparation and characterization of
coated nanoscle Cu/SiCp composite
particles. Ceramics International, 30,
401–404.
80 Jang, Y., Kim, S., Jung, Y. and Lee, S.
(2005) Tensile behavior of carbon
nanofiber-reinforced Cu composites
using the liquid infiltration process.
Metallurgical and Materials Transactions
A-Physical Metallurgy and Materials
Science, 36, 217–223.
81 Kim, K.T., Cha, S.I., Hong, Seong H. and
Hong, Soon H. (2006) Microstructures
and tensile behavior of carbon naotube
reinforced Cu matrix nanocomposites.
Materials Science and Engineering A, 430,
27–33.
82 Nygren, M. and Shen, Z. (2003) On the
preparation of bio-, nano- and structural
ceramics and composites by spark
plasma sintering. Solid State Sciences,
5, 125–131.
83 Licheri, R., Fadda, S., Orru, R., Cao, G.
and Buscaglia, V. (2007) Self-propagating
high-temperature synthesis of barium
titanate and subsequent densification by
Referencesj85
spark plasma sintering (SPS). Journal of
the European Ceramic Society, 27,
2245–2253.
84 Li, J.L., Bai, G.Z., Feng, J.W. and Jiang, W.
(2005) Microstructure and mechanical
properties of hot-pressed carbon
nanotubes compacted by spark plasma
sintering. Carbon, 43, 2649–2653.
85 Sun, Y.P., Fu, K., Lin, Y. and Huang, W.
(2002) Functionalized carbon nanotubes:
Properties and applications. Accounts of
Chemical Research, 35, 1096–1104.
86 Cha, S.I., Kim, K.T., Arshad, S.N., Mo,
C.B. and Hong, S.H. (2005) Extraordinary
strengthening effect of carbon nanotubes
in metal-matrix nanocomposites
processed by molecular-level mixing.
Advanced Materials, 17, 1377–1381.
87 Kim, K.T., Cha, S.I. and Hong, S.H. (2007)
Hardness and wear resistance of carbon
nanotube reinforced Cu matrix
nanocomposites. Materials Science and
Engineering A, 449–451, 46–50.
88 Kim, K.T., Eckert, J., Menzel, S.B.,
Gemming, T. and Hong, S.H. (2008)
Grain refinement assisted strengthening
of carbon nanotube reinforced copper
matrix nanocomposites. Applied Physics
Letters, 92, 121901(1)–121901(3).
89 Kim, K.T., Cha, S.I., Gemming, T., Eckert,
J. and Hong, S.H. (2008) The role of
interfacial oxygen atoms in the enhanced
mechanical properties of carbon
nanotube-reinforced metal matrix
nanocomposites. Small, 4, 1936–1940.
90 Xu, L., Chen, X., Pan, W., Li, W., Yang, Z.
and Pu, Y. (2007) Electrostatic-assembly
carbon nanotube-implanted copper
composite spheres. Nanotechnology, 18,
435607(1)–435607(4).
91 Tjong, S.C. and Chen, H. (2004)
Nanocrystalline materials and coatings.
Materials Science and Engineering R, 45,
1–88.
92 Dalla Torre, F., Van Swygenhoven, H. and
Victoria, M. (2002) Nanocrystalline
electrodeposited nickel: microstructure
and tensile properties. Acta Materialia, 50,
3957–3970.