Carbon Nanotube Reinforced Composites: Metal and Ceramic ...

More documents

Recommendations

Info

einforcement content SiCp/Al composites fabricated by squeeze casting technology. Composites A, 34,1023–1027. 7 Nam, T.H., Requena, G. and Degischer, P. (2008) Thermal expansion behavior of aluminum matrix composites with densely packed SiC particles. Composites A, 39, 856–865. 8 Ma, Z.Y. and Tjong, S.C. (2000) High temperature creep behavior of SiC particulate reinforced Al-Fe-V-Si alloy composite. Materials Science and Engineering A, 278, 5–13. 9 Tjong, S.C. and Ma, Z.Y. (1999) High-temperature creep behavior of powder-metallurgy aluminum composites reinforced with SiC particles of various sizes. Composites Science and Technology, 59, 1117–1125. 10 Lewis, C.A. and Withers, P.J. (1995) Weibull modeling of particle cracking in metal matrix composites. Acta Metallurgica, 43, 3685–3699. 11 Spowart, J.E. and Micracle, D. (2003) The influence of reinforcement morphology on the tensile response of 6061/SiC/25p discontinuouslyreinforced aluminum. Materials Science and Engineering A, 357, 111–123. 12 Shen, Y.L., Williams, J.J., Piotrowski, G., Chawla, N. and Guo, Y.L. (2001) Correlation between tensile and indentation behavior of particlereinforced metal matrix composites: An experimental and numerical study. Acta Materialia, 49, 3219–3229. 13 Ma, Z.Y., Li, Y.L., Liang, Y., Zheng, F., Bi, J. and Tjong, S.C. (1996) Nanonometric Si3N 4 particulate-reinforced aluminum composite. Materials Science and Engineering A, 219, 229–231. 14 Tun, K.S. and Gupta, M. (2007) Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method. Composites Science and Technology, 67, 2657–2664. 15 Cao, G. and Li, X. (2008) Mechanical properties and microstructure of SiC- Referencesj81 reinforced Mg-(2,4)Al-Si nanocomposites fabricated by ultrasonic cavitation based solidification processing. Materials Science and Engineering A, 486, 357–362. 16 Kuzumaki, T., Miyazawa, K., Ichinose, H. and Ito, K. (1998) Processing of carbon nanotube reinforced aluminum composite. Journal of Materials Research, 13, 2445–2449. 17 Ci, L., Ryu, Z., Phillipp, N.Y. and Ruhle, M. (2006) Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum. Acta Materialia, 54, 5367–5375. 18 Chen, W.X., Tu, J.P., Wang, L.Y., Gan, H.Y., Xu, Z.D. and Zhang, X.B. (2003) Tribological application of carbon nanotubes in a metal-based composite coating and composites. Carbon, 41, 215–222. 19 Carreno-Morelli, E., Yang, J., Couteau, E., Hernadi, K., Seo, J.W., Bonjour, C., Forro, L. and Schaller, R. (2004) Carbon nanotube/magnesium composites. Physica Status Solidi A-Applied Research, 201, R53–R55. 20 Lau, K.T. and Hui, D. (2002) Effectiveness of using carbon nanotubes as nanoreinforcements for advanced composite structures. Carbon, 40, 1597–1617. 21 Viswanathan, V., Laha, T., Balani, K., Agarwal, A. and Seal, S. (2006) Challenges and advances in nanocomposite processing techniques. Materials Science and Engineering R, 54, 121–285. 22 Tjong, S.C., Ku, J.S. and Wu, C.S. (1994) Corrosion behavior of laser consolidated chromium and molybdenum plasma spray coating on Fe-28Mn-7Al-1C alloy. Scripta Metallurgica et Materialia, 31, 835–839. 23 Laha, T., Agarwarl, A., McKechnie, T. and Seal, S. (2004) Synthesis and characterization of plasma spray formed carbon nanotubes reinforced aluminum composite. Materials Science and Engineering A, 381, 249–258. 24 Laha, T., Kuchibhatla, S., Seal, S., Li, W. and Agarwal, A. (2007) Interfacial
82j 2 Carbon Nanotube–Metal Nanocomposites phenomena in thermally sprayed multiwalled carbon nanotube reinforced aluminum nanocomposite. Acta Materialia, 55, 1059–1066. 25 Laha, T., Liu, Y. and Agarwarl, A. (2007) Carbon nanotubes reinforced aluminum nanocomposite via plasma and high velocity oxy-fuel spray forming. Journal of Nanoscience and Nanotechnology, 7, 515–524. 26 Laha, T. and Agarwarl, A. (2008) Effect of sintering on thermally sprayed carbon nanotube reinforced aluminum nanocomposite. Materials Science and Engineering A, 480, 323–332. 27 Zhou, S.M., Zhang, X.B., Ding, Z.P., Min, C.Y., Xu, G.L. and Zhu, W.M. (2007) Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique. Composites A, 38, 301–306. 28 Bakshi, S.R., Singh, V., Balani, K., McCartney, D.R., Seal, S. and Agarwal, A. (2008) Carbon nanotube reinforced aluminum composite coating via cold spraying. Surface & Coatings Technology, 202, 5162–5169. 29 Zhong, R., Cong, H. and Hou, P. (2003) Fabrication of nano-Al based composites reinforced by single-walled carbon nanotubes. Carbon, 41, 848–851. 30 Esawi, A.M. and El Borady, M.A. (2008) Carbon-nanotube-reinforced aluminum strips. Composites Science and Technology, 68, 486–492. 31 Tjong, S.C. and Tam, K.F. (2006) Mechanical and thermal expansion of hipped Al-TiB2 composites. Materials Chemistry and Physics, 97, 91–97. 32 Bahnu Prasad, V.V., Bhat, B.V., Mahajan, Y.R. and Ramakrishnan, R. (2002) Structure-property correlation in discontinuously reinforced aluminum matrix composites as a function of relative particle size ratio. Materials Science and Engineering A, 337, 179–186. 33 Slipenyuk, A., Kuprin, V., Milman, Y., Spowart, J.E. and Miracle, D.B. (2004) The effect of matrix to reinforcement particle size ratio (PSR) on the microstructure and mechanical properties of a P/M AlCuMn/ SiCp MMC. Materials Science and Engineering A, 381, 165–170. 34 George, R., Kashyap, K.T., Rahul, R. and Yamdagni, S. (2005) Strengthening in carbon nanotube/aluminum (CNT/Al) composites. Scripta Materialia, 53, 1159–1163. 35 Deng, C.F., Wang, Z.Z., Zhang, X.X. and Li, A.B. (2007) Processing and properties of carbon nanotubes reinforced aluminum composites. Materials Science and Engineering A, 444, 138–145. 36 Esawi, A. and Morsi, K. (2007) Dispersion of carbon nanotubes (CNTs) in aluminum powder. Composites A, 38, 646–650. 37 Morsi, K. and Esawi, A. (2007) Effect of mechanical alloying time and carbon nanaotube (CNT) content on the evolution of aluminum (Al)-CNT composite powders. Journal of Materials Science, 42, 4954–4959. 38 Perez-Bustamante, R., Estrada-Guel, I., Antunez-Flores, W., Miki-Yoshida, M., Ferreira, P.J. and Martinez-Sanchez, R. (2008) Novel Al-matrix nanocomposites reinforced with multi-walled carbon nanotubes. Journal of Alloys and Compounds, 450, 323–326. 39 Lee, S.W., Choi, H.J., Kim, Y. and Bae, D.H. (2007) Deformation behavior of nanoparticles/fiber-reinforced nanocrystalline Al-matrix composites. Materials Science and Engineering A, 449–451, 782–784. 40 Noguchi, T., Magario, A., Fukazawa, S., Shimizu, S., Beppu, J. and Seki, M. (2004) Carbon nanotube/ aluminum composites with uniform dispersion. Materials Transactions (JIM), 45, 602–604. 41 Yuuki, J., Kwon, H., Kawasaki, A., Magario, A., Noguchi, T., Beppu, J. and Seki, M. (2007) Fabrication of carbon nanotube reinforced aluminum composites by powder extrusion process.
Page 2 and 3:
Sie Chin Tjong Carbon Nanotube Rein
Page 4 and 5:
Sie Chin Tjong Carbon Nanotube Rein
Page 6 and 7:
Contents Preface IX List of Abbrevi
Page 8 and 9:
5 Carbon Nanotube-Ceramic Nanocompo
Page 10:
Preface Carbon nanotubes are nanost
Page 13 and 14:
XII List of Abbreviations HIP hot i
Page 16 and 17:
1 Introduction 1.1 Background Compo
Page 18 and 19:
Figure 1.2 Transmission electron mi
Page 20 and 21:
1.3 Synthesis of Carbon Nanotubes 1
Page 22 and 23:
MWNTs can be as high as 70% of the
Page 24 and 25:
Figure 1.7 In situ TEM images recor
Page 26 and 27:
1.3 Synthesis of Carbon Nanotubesj1
Page 28 and 29:
show TEM images of MWNTs synthesize
Page 30 and 31:
Since then, large efforts have been
Page 32 and 33:
1.3.4 Patent Processes Carbon nanot
Page 34 and 35:
1.4 Purification of Carbon Nanotube
Page 36 and 37:
Table 1.3 Patent processes for the
Page 38 and 39:
Figure 1.13 Schematic illustration
Page 40 and 41:
1.5 Mechanical Properties of Carbon
Page 42 and 43:
Figure 1.14 Carbon nanotubes in hig
Page 44 and 45:
Figure 1.15 In situ tensile deforma
Page 46 and 47: Table 1.7 Theoretical and experimen
Page 48 and 49: Nomenclature ~a 1 , ~a 2 Unit vecto
Page 50 and 51: carbon nanotubes. Physical Review L
Page 52 and 53: 70 Jang, I., Uh, H.S., Cho, H.J., L
Page 54 and 55: 108 Shelimov, K.B., Esenaliev, R.O.
Page 56 and 57: Bonnamy, S., Beguin, F., Burnham, N
Page 58 and 59: 2 Carbon Nanotube-Metal Nanocomposi
Page 60 and 61: isostatic pressing. In certain case
Page 62 and 63: This implies the absence of effecti
Page 64 and 65: coating material, the plasma gun an
Page 66 and 67: Table 2.4 Changes in the size and v
Page 68 and 69: Figure 2.6 (a) Low and (b) high mag
Page 70 and 71: Figure 2.8 SEM micrographs showing
Page 72 and 73: Figure 2.11 Bright field TEM microg
Page 74 and 75: Figure 2.13 TEM image of bulk Al/5
Page 76 and 77: 2.5 Magnesium-Based Nanocomposites
Page 78 and 79: limited improvement in ultimate ten
Page 80 and 81: Figure 2.18 SEM micrographs of the
Page 82 and 83: Figure 2.19 (a) Low and (b) high ma
Page 84 and 85: Figure 2.22 SEM micrographs of (a)
Page 86 and 87: Figure 2.25 (a) TEM micrograph show
Page 88 and 89: 2.8 Transition Metal-Based Nanocomp
Page 90 and 91: Figure 2.27 TEM image of electrodep
Page 92 and 93: Figure 2.29 SEM micrographs of (a)
Page 94 and 95: Figure 2.31 Schematic representatio
Page 98 and 99: Materials Science Forum, 534-536 (P
Page 100 and 101: composite. Materials Science and En
Page 102: 111 Cha, S.I., Kim, K.T., Arshad, S
Page 105 and 106: 90j 3 Physical Properties of Carbon
Page 115 and 116: 100j 3 Physical Properties of Carbo
Page 117 and 118: 102j 3 Physical Properties of Carbo
Page 119 and 120: 104j 4 Mechanical Characteristics o
Page 147 and 148:
132j 5 Carbon Nanotube-Ceramic Nano
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
170j 6 Physical Properties of Carbo
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
186j 7 Mechanical Properties of Car
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Table 8.1 Patent processes for maki
Page 233 and 234:
218j 8 Conclusions development of c
Page 235 and 236:
220j 8 Conclusions Figure 8.2 TEM m
Page 237 and 238:
222j 8 Conclusions increase in Vick
Page 239 and 240:
224j 8 Conclusions References 1 Cha
Page 241 and 242:
226j 8 Conclusions nano-matrix. Scr
Page 243:
228j Index l laser ablation 7 load
show all

Carbon Nanotube Reinforced Composites: Metal and Ceramic ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?