Carbon Nanotube Reinforced Composites: Metal and Ceramic ...

More documents

Recommendations

Info

composite. Materials Science and Engineering A, 284, 70–76. 75 Tjong, S.C. and Wang, G.S. (2006) Lowcycle fatigue behavior of in-situ TiB2/Cu composite prepared by reactive hot pressing. Journal of Materials Science, 41, 5263–5268. 76 Chang, S.Y. and Lin, S. (1996) J. fabrication of SiCw reinforced copper matrix composite by electrodeless copper plating. Scripta Materialia, 35, 225–231. 77 Yih, P. and Chung, D.D. (1996) Silicon carbide whisker copper-matrix composites fabricated by hot pressing copper coated whiskers. Journal of Materials Science, 31, 399–406. 78 Lee, Y.F., Lee, S.L., Chuang, C.L. and Lin, J.C. (1999) Effect of SiC p reinforcement by electrodeless copper plating on properties of Cu/SiCp composites. Powder Metallurgy, 42, 147–152. 79 Zhang, R., Gao, L. and Guo, J. (2004) Preparation and characterization of coated nanoscle Cu/SiCp composite particles. Ceramics International, 30, 401–404. 80 Jang, Y., Kim, S., Jung, Y. and Lee, S. (2005) Tensile behavior of carbon nanofiber-reinforced Cu composites using the liquid infiltration process. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 36, 217–223. 81 Kim, K.T., Cha, S.I., Hong, Seong H. and Hong, Soon H. (2006) Microstructures and tensile behavior of carbon naotube reinforced Cu matrix nanocomposites. Materials Science and Engineering A, 430, 27–33. 82 Nygren, M. and Shen, Z. (2003) On the preparation of bio-, nano- and structural ceramics and composites by spark plasma sintering. Solid State Sciences, 5, 125–131. 83 Licheri, R., Fadda, S., Orru, R., Cao, G. and Buscaglia, V. (2007) Self-propagating high-temperature synthesis of barium titanate and subsequent densification by Referencesj85 spark plasma sintering (SPS). Journal of the European Ceramic Society, 27, 2245–2253. 84 Li, J.L., Bai, G.Z., Feng, J.W. and Jiang, W. (2005) Microstructure and mechanical properties of hot-pressed carbon nanotubes compacted by spark plasma sintering. Carbon, 43, 2649–2653. 85 Sun, Y.P., Fu, K., Lin, Y. and Huang, W. (2002) Functionalized carbon nanotubes: Properties and applications. Accounts of Chemical Research, 35, 1096–1104. 86 Cha, S.I., Kim, K.T., Arshad, S.N., Mo, C.B. and Hong, S.H. (2005) Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing. Advanced Materials, 17, 1377–1381. 87 Kim, K.T., Cha, S.I. and Hong, S.H. (2007) Hardness and wear resistance of carbon nanotube reinforced Cu matrix nanocomposites. Materials Science and Engineering A, 449–451, 46–50. 88 Kim, K.T., Eckert, J., Menzel, S.B., Gemming, T. and Hong, S.H. (2008) Grain refinement assisted strengthening of carbon nanotube reinforced copper matrix nanocomposites. Applied Physics Letters, 92, 121901(1)–121901(3). 89 Kim, K.T., Cha, S.I., Gemming, T., Eckert, J. and Hong, S.H. (2008) The role of interfacial oxygen atoms in the enhanced mechanical properties of carbon nanotube-reinforced metal matrix nanocomposites. Small, 4, 1936–1940. 90 Xu, L., Chen, X., Pan, W., Li, W., Yang, Z. and Pu, Y. (2007) Electrostatic-assembly carbon nanotube-implanted copper composite spheres. Nanotechnology, 18, 435607(1)–435607(4). 91 Tjong, S.C. and Chen, H. (2004) Nanocrystalline materials and coatings. Materials Science and Engineering R, 45, 1–88. 92 Dalla Torre, F., Van Swygenhoven, H. and Victoria, M. (2002) Nanocrystalline electrodeposited nickel: microstructure and tensile properties. Acta Materialia, 50, 3957–3970.
86j 2 Carbon Nanotube–Metal Nanocomposites 93 Wei, H., Hibbard, G.D., Palumbo, G. and Erb, U. (2007) The effect of gauge volume on the tensile properties of nanocrystalline electrodeposits. Scripta Materialia, 57, 996–999. 94 Qu, N.S., Zhu, D. and Chan, K.C. (2006) Fabrication of Ni-CeO 2 nanocomposite by electrodeposition. Scripta Materialia, 54, 1421–1425. 95 Barnejee, S. and Chakravorty, D. (1998) Electrical resistivity of copper-silica nanocomposites synthesized by electrodeposition. Journal of Applied Physics, 84, 799–805. 96 Barnejee, S., Ghosh, A.K. and Chakravorty, D. (1999) Electrical properties of iron-silica nanocomposites synthesized by electrodeposition. Journal of Applied Physics, 86, 6835–6840. 97 Chai, G., Sun, Y., Sun, J.J. and Chen, Q. (2008) Mechanical properties of carbon nanotube-copper nanocomposites. Journal of Micromechanics and Microengineering, 18, 035013–035018. 98 Lim, B., Kim, C.J., Kim, B., Shim, U., Oh, S., Sung, B.H., Choi, J.H. and Baik, S.H. (2008) The effects of interfacial bonding on mechanical properties of single-walled carbon nanotube reinforced copper matrix nanocomposites. Nanotechnology, 17, 5759–5764. 99 Hong, Soon H., Cha, S.I., Kim, K.T. and Hong, Seong H. (2007) Method of producing metal nanocomposite powder reinforced with carbon nanotubes and the powder prepared thereby. U.S. Patent 7217311. 100 Jeon, Y.S., Byun, J.Y. and Oh, T.S. (2008) Electrodeposition and mechanical properties of Ni-carbon nanotube nanocomposite coatings. Journal of Physics and Chemistry of Solids, 69, 1391–1394. 101 Choi, E.K., Lee, K.Y. and Oh, T.S. (2008) Fabrication of multi-walled carbon nanotubes-reinforced Sn nanocomposites for lead-free solder by an electrodeposition process. Journal of Physics and Chemistry of Solids, 69, 1403–1406. 102 Dai, P.Q., Xu, W.C. and Huang, Q.Y. (2008) Mechanical properties and microstructure of nanocrystalline nickelcarbon nanotube composites produced by electrodeposition. Materials Science and Engineering A, 483–484, 172–174. 103 Thiemig, D., Lange, R. and Bund, A. (2007) Influence of pulse plating parameters on the electrocodeposition of matrix metal nanocomposites. Electrochimica Acta, 52, 7362–7371. 104 Hou, K.H., Hwu, W.H., Ke, S.T. and Ger, M.D. (2006) Ni-P-SiC composite produced by pulse and direct current plating. Materials Chemistry and Physics, 100, 54–59. 105 Sun, Y., Sun, J.R. and Chen, Q.F. (2007) Mechanical strength of carbon nanotubenickel nanocomposites. Nanotechnology, 18, 505704(1)–505704(6). 106 Guo, C., Zuo, Y., Zhao, X., Zhao, J.M. and Xiong, J. (2007) The effects of pulsereverse parameters on the properties of Ni-carbon nanotube composite coatings. Surface & Coatings Technology, 201, 9491–9496. 107 Chen, X., Xia, J., Peng, J., Li, W. and Xie, S. (2000) Carbon-nanotube metal-matrix composites prepared by electrodeless plating. Composites Science and Technology, 60, 301–306. 108 Wang, F., Arai, S. and Endo, M. (2005) The preparation of multi-walled carbon nanotubes with a Ni-P coating by an electrodeless deposition process. Carbon, 43, 1716–1721. 109 Liu, H., Cheng, G., Zheng, R., Zhao, H. and Liang, C. (2006) Influence of synthesis process on preparation and properties of Ni/CNT catalyst. Diamond and Related Materials, 15, 15–21. 110 Jeong, Y.J., Cha, S.I., Kim, K.T., Lee, K.H., Mo, C.B. and Hong, S.H. (2007) Synergistic strengthening effect of ultrafine-grained metals reinforced with carbon nanotubes. Small, 3, 840–844.
Page 2 and 3:
Sie Chin Tjong Carbon Nanotube Rein
Page 4 and 5:
Sie Chin Tjong Carbon Nanotube Rein
Page 6 and 7:
Contents Preface IX List of Abbrevi
Page 8 and 9:
5 Carbon Nanotube-Ceramic Nanocompo
Page 10:
Preface Carbon nanotubes are nanost
Page 13 and 14:
XII List of Abbreviations HIP hot i
Page 16 and 17:
1 Introduction 1.1 Background Compo
Page 18 and 19:
Figure 1.2 Transmission electron mi
Page 20 and 21:
1.3 Synthesis of Carbon Nanotubes 1
Page 22 and 23:
MWNTs can be as high as 70% of the
Page 24 and 25:
Figure 1.7 In situ TEM images recor
Page 26 and 27:
1.3 Synthesis of Carbon Nanotubesj1
Page 28 and 29:
show TEM images of MWNTs synthesize
Page 30 and 31:
Since then, large efforts have been
Page 32 and 33:
1.3.4 Patent Processes Carbon nanot
Page 34 and 35:
1.4 Purification of Carbon Nanotube
Page 36 and 37:
Table 1.3 Patent processes for the
Page 38 and 39:
Figure 1.13 Schematic illustration
Page 40 and 41:
1.5 Mechanical Properties of Carbon
Page 42 and 43:
Figure 1.14 Carbon nanotubes in hig
Page 44 and 45:
Figure 1.15 In situ tensile deforma
Page 46 and 47:
Table 1.7 Theoretical and experimen
Page 48 and 49:
Nomenclature ~a 1 , ~a 2 Unit vecto
Page 50 and 51: carbon nanotubes. Physical Review L
Page 52 and 53: 70 Jang, I., Uh, H.S., Cho, H.J., L
Page 54 and 55: 108 Shelimov, K.B., Esenaliev, R.O.
Page 56 and 57: Bonnamy, S., Beguin, F., Burnham, N
Page 58 and 59: 2 Carbon Nanotube-Metal Nanocomposi
Page 60 and 61: isostatic pressing. In certain case
Page 62 and 63: This implies the absence of effecti
Page 64 and 65: coating material, the plasma gun an
Page 66 and 67: Table 2.4 Changes in the size and v
Page 68 and 69: Figure 2.6 (a) Low and (b) high mag
Page 70 and 71: Figure 2.8 SEM micrographs showing
Page 72 and 73: Figure 2.11 Bright field TEM microg
Page 74 and 75: Figure 2.13 TEM image of bulk Al/5
Page 76 and 77: 2.5 Magnesium-Based Nanocomposites
Page 78 and 79: limited improvement in ultimate ten
Page 80 and 81: Figure 2.18 SEM micrographs of the
Page 82 and 83: Figure 2.19 (a) Low and (b) high ma
Page 84 and 85: Figure 2.22 SEM micrographs of (a)
Page 86 and 87: Figure 2.25 (a) TEM micrograph show
Page 88 and 89: 2.8 Transition Metal-Based Nanocomp
Page 90 and 91: Figure 2.27 TEM image of electrodep
Page 92 and 93: Figure 2.29 SEM micrographs of (a)
Page 94 and 95: Figure 2.31 Schematic representatio
Page 96 and 97: einforcement content SiCp/Al compos
Page 98 and 99: Materials Science Forum, 534-536 (P
Page 102: 111 Cha, S.I., Kim, K.T., Arshad, S
Page 105 and 106: 90j 3 Physical Properties of Carbon
Page 115 and 116: 100j 3 Physical Properties of Carbo
Page 117 and 118: 102j 3 Physical Properties of Carbo
Page 119 and 120: 104j 4 Mechanical Characteristics o
Page 147 and 148: 132j 5 Carbon Nanotube-Ceramic Nano
Page 149 and 150: 134j 5 Carbon Nanotube-Ceramic Nano
Page 151 and 152:
136j 5 Carbon Nanotube-Ceramic Nano
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
170j 6 Physical Properties of Carbo
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
186j 7 Mechanical Properties of Car
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Table 8.1 Patent processes for maki
Page 233 and 234:
218j 8 Conclusions development of c
Page 235 and 236:
220j 8 Conclusions Figure 8.2 TEM m
Page 237 and 238:
222j 8 Conclusions increase in Vick
Page 239 and 240:
224j 8 Conclusions References 1 Cha
Page 241 and 242:
226j 8 Conclusions nano-matrix. Scr
Page 243:
228j Index l laser ablation 7 load
show all

Carbon Nanotube Reinforced Composites: Metal and Ceramic ...

Create successful ePaper yourself

Delete template?

Save as template?