Carbon Nanotube Reinforced Composites: Metal and Ceramic ...

More documents

Recommendations

Info

96 Zhao, L., Yu, Y., Song, L., Hu, X. and Larbot, A. (2005) Synthesis and characterization of nanostructured titania film for photocatalysis. Applied Surface Science, 239, 285–291. 97 Sotter, E., Vilanova, X., Llobet, E., Vasieliev, A. and Correig, X. (2007) thick film titania sensors for detecting traces of oxygen. Sensors and Actuators B-Chemical, 127, 567–579. 98 Milella, E., Cosentino, F., Licciulli, A. and Massaro, C. (2001) Preparation and characterization of titania/hydroxyapatite composite coatings by sol-gel process. Biomaterials, 22, 1425–1431. 99 Wen, C.E., Xu, W., Hu, W.Y. and Hodgson, P.D. (2007) Hydroxyapatite/ titania sol-gel coatings on titaniumzirconium alloy for biomedical applications. Acta Biomaterialia, 3, 403–410. 100 Xia, X.H., Jia, Z.J., Yu, Y., Liang, Y., Wang, Z. and Ma, L.L. (2007) Preparation of multi-walled nanotubes supported TiO2 and its photocatalytic activity in the reduction of CO 2 with H 2O. Carbon, 45, 717–721. 101 Sun, J., Iwasa, M., Gao, L. and Zhang, Q. (2004) Single-walled carbon nanotubes coated with titania nanoparticles. Carbon, 42, 895–899. 102 Jitianu, A., Cacciaguerra, T., bBenoit, R., Delpeux, S., Bbeguin, F. and Bonnamy, S. (2004) Synthesis and characterization of carbon nanotubes-TiO2 nanocomposites. Carbon, 42, 1147–1151. 103 Li, Y., Xie, Y., Gong, J., Chen, Y. and Zhang, Z. (2001) Preparation of Ni/YSZ materials for SOFC anodes by buffersolution method. Materials Science and Engineering: B, 86, 119–122. 104 Lenormand, P., Caravaca, D., Laberty- Robert, C. and Ansart, F. (2005) Thick films of YSZ electrolyte by dip-coating process. Journal of the European Ceramic Society, 25, 2643–2646. 105 Duszova, A., Dusza, J., Tomasek, K., Blugan, G. and Kuebler, J. (2008) Microstructure and properties of carbon Referencesj167 nanotube/zirconia composite. Journal of the European Ceramic Society, 28, 1023–1027. 106 Sun, J., Gao, L., Iwasa, M., Nakayama, T. and Niihara, K. (2005) Failure investigation of carbon nanotube/3Y-TZP nanocomposites. Ceramics International, 31, 1131–1134. 107 Lupo, F., Kamalakaran, R., Scheu, C., Grobert, N. and Ruhle, M. (2004) Microstructural investigations on zirconium oxide-carbon nanotube composites synthesized by hydrothermal crystallization. Carbon, 42, 1995–1999. 108 Shan, Y. and Gao, L. (2005) Synthesis and characterization of phase controllable ZrO 2-carbon nanotubes nanocomposites. Nanotechnology, 16, 625–630. 109 Jin, H.Y., Ishiyama, M., Qiao, G.J., Gao, J.Q. and Jin, Z.H. (2008) Plasma active sintering of silicon carbide. Materials Science and Engineering A, 484, 270–272. 110 Chen, Y.X., Li, J.T. and Du, J.S. (2008) Cost effective combustion synthesis of silicon nitride. Materials Research Bulletin, 43, 1598–1606. 111 Heian, E.M., Khalsa, S.K., Lee, W., Munir, Z.A., Yamamoto, T. and Ohyanagi, M. (2004) Synthesis of dense, high-defect concentration B4C through mechanical activation and filed-assisted combustion. Journal of the American Ceramic Society, 87, 779–783. 112 Kamalakaran, R., Lupo, F., Grobert, N., Scheu, T., Jin-Phillipp, N.Y. and Ruhle, M. (2004) Microstructural characterization of C-SiC-carbon nanotube composite flake. Carbon, 42, 1–4. 113 Morisada, Y., Miyamoto, Y., Takaura, Y., Hirota, K. and Tamari, N. (2007) Mechanical properties of SiC composites incorporating SiC-coated multi-walled carbon nanotubes. International Journal of Refractory Metals & Hard Materials, 25, 322–327. 114 Hirota, K., Hara, H. and Kato, M. (2007) Mechanical properties of simultaneously synthesized and consolidated carbon
168j 5 Carbon Nanotube–Ceramic Nanocomposites nanofiber (CNF)-dispersed SiC composites by pulsed electric-current pressure sintering. Materials Science and Engineering A, 458, 216–225. 115 Wang, Z., Iqbal, Z. and Mitra, S. (2006) Rapid, low temperature microwave synthesis of novel carbon nanotubesilicon carbide composite. Carbon, 44, 2804–2808. 116 Yamamoto, G., Yokomizo, K., Omori, M., Sato, Y., Jeyadevan, B., Motomiya, K., Hashida, T., Takahashi, T., Okubo, A. and Tohji, K. (2007) Polycarbosilane-derived SiC/single-walled carbon nanotube nanocomposites. Nanotechnology, 18, 1456141–1456145. 117 Katsuda, Y., Gerstel, P., Narayanan, J., Bill, J. and Aldinger, F. (2006) Reinforcement of precursor-derived Si-C-N ceramics with carbon nanotubes. Journal of the European Ceramic Society, 26, 3399–3405. 118 Kroke, E., Li, Y.L., Konetschny, C., Lecomte, E., Fasel, C. and Riedel, R. (2000) Silazane derived ceramics and related materials. Materials Science & Engineering. R, 26, 97–199. 119 Balazsi, C., Konya, Z., Weber, F., Biro, L.P. and Arato, P. (2003) Preparation and characterization of carbon nanotube reinforced silicon nitride composites. Materials Science and Engineering C, 36, 1133–1137. 120 Balazsi, C., Shen, Z., Konya, Z., Kasztovszky, Z., Weber, F., Vertesy, Z., Biro, L.P., Kiricsi, I. and Arato, P. (2005) Processing of carbon nanotube reinforced silicon nitride composites by spark plasma sintering. Composites Science and Technology, 65, 727–733.
Page 2 and 3:
Sie Chin Tjong Carbon Nanotube Rein
Page 4 and 5:
Sie Chin Tjong Carbon Nanotube Rein
Page 6 and 7:
Contents Preface IX List of Abbrevi
Page 8 and 9:
5 Carbon Nanotube-Ceramic Nanocompo
Page 10:
Preface Carbon nanotubes are nanost
Page 13 and 14:
XII List of Abbreviations HIP hot i
Page 16 and 17:
1 Introduction 1.1 Background Compo
Page 18 and 19:
Figure 1.2 Transmission electron mi
Page 20 and 21:
1.3 Synthesis of Carbon Nanotubes 1
Page 22 and 23:
MWNTs can be as high as 70% of the
Page 24 and 25:
Figure 1.7 In situ TEM images recor
Page 26 and 27:
1.3 Synthesis of Carbon Nanotubesj1
Page 28 and 29:
show TEM images of MWNTs synthesize
Page 30 and 31:
Since then, large efforts have been
Page 32 and 33:
1.3.4 Patent Processes Carbon nanot
Page 34 and 35:
1.4 Purification of Carbon Nanotube
Page 36 and 37:
Table 1.3 Patent processes for the
Page 38 and 39:
Figure 1.13 Schematic illustration
Page 40 and 41:
1.5 Mechanical Properties of Carbon
Page 42 and 43:
Figure 1.14 Carbon nanotubes in hig
Page 44 and 45:
Figure 1.15 In situ tensile deforma
Page 46 and 47:
Table 1.7 Theoretical and experimen
Page 48 and 49:
Nomenclature ~a 1 , ~a 2 Unit vecto
Page 50 and 51:
carbon nanotubes. Physical Review L
Page 52 and 53:
70 Jang, I., Uh, H.S., Cho, H.J., L
Page 54 and 55:
108 Shelimov, K.B., Esenaliev, R.O.
Page 56 and 57:
Bonnamy, S., Beguin, F., Burnham, N
Page 58 and 59:
2 Carbon Nanotube-Metal Nanocomposi
Page 60 and 61:
isostatic pressing. In certain case
Page 62 and 63:
This implies the absence of effecti
Page 64 and 65:
coating material, the plasma gun an
Page 66 and 67:
Table 2.4 Changes in the size and v
Page 68 and 69:
Figure 2.6 (a) Low and (b) high mag
Page 70 and 71:
Figure 2.8 SEM micrographs showing
Page 72 and 73:
Figure 2.11 Bright field TEM microg
Page 74 and 75:
Figure 2.13 TEM image of bulk Al/5
Page 76 and 77:
2.5 Magnesium-Based Nanocomposites
Page 78 and 79:
limited improvement in ultimate ten
Page 80 and 81:
Figure 2.18 SEM micrographs of the
Page 82 and 83:
Figure 2.19 (a) Low and (b) high ma
Page 84 and 85:
Figure 2.22 SEM micrographs of (a)
Page 86 and 87:
Figure 2.25 (a) TEM micrograph show
Page 88 and 89:
2.8 Transition Metal-Based Nanocomp
Page 90 and 91:
Figure 2.27 TEM image of electrodep
Page 92 and 93:
Figure 2.29 SEM micrographs of (a)
Page 94 and 95:
Figure 2.31 Schematic representatio
Page 96 and 97:
einforcement content SiCp/Al compos
Page 98 and 99:
Materials Science Forum, 534-536 (P
Page 100 and 101:
composite. Materials Science and En
Page 102:
111 Cha, S.I., Kim, K.T., Arshad, S
Page 105 and 106:
90j 3 Physical Properties of Carbon
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
100j 3 Physical Properties of Carbo
Page 117 and 118:
102j 3 Physical Properties of Carbo
Page 119 and 120:
104j 4 Mechanical Characteristics o
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132: 116j 4 Mechanical Characteristics o
Page 147 and 148: 132j 5 Carbon Nanotube-Ceramic Nano
Page 181: 166j 5 Carbon Nanotube-Ceramic Nano
Page 185 and 186: 170j 6 Physical Properties of Carbo
Page 201 and 202: 186j 7 Mechanical Properties of Car
Page 231 and 232: Table 8.1 Patent processes for maki
Page 233 and 234:
218j 8 Conclusions development of c
Page 235 and 236:
220j 8 Conclusions Figure 8.2 TEM m
Page 237 and 238:
222j 8 Conclusions increase in Vick
Page 239 and 240:
224j 8 Conclusions References 1 Cha
Page 241 and 242:
226j 8 Conclusions nano-matrix. Scr
Page 243:
228j Index l laser ablation 7 load
show all

Carbon Nanotube Reinforced Composites: Metal and Ceramic ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?