Carbon Nanotube Reinforced Composites: Metal and Ceramic ...

einforcement content SiCp/Al
composites fabricated by squeeze casting
technology. Composites A, 34,1023–1027.
7 Nam, T.H., Requena, G. and Degischer, P.
(2008) Thermal expansion behavior of
aluminum matrix composites with
densely packed SiC particles. Composites
A, 39, 856–865.
8 Ma, Z.Y. and Tjong, S.C. (2000) High
temperature creep behavior of SiC
particulate reinforced Al-Fe-V-Si alloy
composite. Materials Science and
Engineering A, 278, 5–13.
9 Tjong, S.C. and Ma, Z.Y. (1999)
High-temperature creep behavior of
powder-metallurgy aluminum
composites reinforced with SiC particles
of various sizes. Composites Science and
Technology, 59, 1117–1125.
10 Lewis, C.A. and Withers, P.J. (1995)
Weibull modeling of particle cracking in
metal matrix composites. Acta
Metallurgica, 43, 3685–3699.
11 Spowart, J.E. and Micracle, D. (2003)
The influence of reinforcement
morphology on the tensile response of
6061/SiC/25p discontinuouslyreinforced
aluminum. Materials Science
and Engineering A, 357, 111–123.
12 Shen, Y.L., Williams, J.J., Piotrowski, G.,
Chawla, N. and Guo, Y.L. (2001)
Correlation between tensile and
indentation behavior of particlereinforced
metal matrix composites: An
experimental and numerical study. Acta
Materialia, 49, 3219–3229.
13 Ma, Z.Y., Li, Y.L., Liang, Y., Zheng, F., Bi, J.
and Tjong, S.C. (1996) Nanonometric
Si3N 4 particulate-reinforced aluminum
composite. Materials Science and
Engineering A, 219, 229–231.
14 Tun, K.S. and Gupta, M. (2007) Improving
mechanical properties of magnesium
using nano-yttria reinforcement and
microwave assisted powder metallurgy
method. Composites Science and
Technology, 67, 2657–2664.
15 Cao, G. and Li, X. (2008) Mechanical
properties and microstructure of SiC-
Referencesj81
reinforced Mg-(2,4)Al-Si nanocomposites
fabricated by ultrasonic cavitation based
solidification processing. Materials
Science and Engineering A, 486, 357–362.
16 Kuzumaki, T., Miyazawa, K., Ichinose, H.
and Ito, K. (1998) Processing of carbon
nanotube reinforced aluminum
composite. Journal of Materials Research,
13, 2445–2449.
17 Ci, L., Ryu, Z., Phillipp, N.Y. and Ruhle,
M. (2006) Investigation of the interfacial
reaction between multi-walled carbon
nanotubes and aluminum. Acta
Materialia, 54, 5367–5375.
18 Chen, W.X., Tu, J.P., Wang, L.Y., Gan,
H.Y., Xu, Z.D. and Zhang, X.B. (2003)
Tribological application of carbon
nanotubes in a metal-based composite
coating and composites. Carbon, 41,
215–222.
19 Carreno-Morelli, E., Yang, J., Couteau, E.,
Hernadi, K., Seo, J.W., Bonjour, C., Forro,
L. and Schaller, R. (2004) Carbon
nanotube/magnesium composites.
Physica Status Solidi A-Applied Research,
201, R53–R55.
20 Lau, K.T. and Hui, D. (2002) Effectiveness
of using carbon nanotubes as nanoreinforcements
for advanced composite
structures. Carbon, 40, 1597–1617.
21 Viswanathan, V., Laha, T., Balani, K.,
Agarwal, A. and Seal, S. (2006) Challenges
and advances in nanocomposite
processing techniques. Materials Science
and Engineering R, 54, 121–285.
22 Tjong, S.C., Ku, J.S. and Wu, C.S. (1994)
Corrosion behavior of laser consolidated
chromium and molybdenum plasma
spray coating on Fe-28Mn-7Al-1C alloy.
Scripta Metallurgica et Materialia, 31,
835–839.
23 Laha, T., Agarwarl, A., McKechnie, T.
and Seal, S. (2004) Synthesis and
characterization of plasma spray
formed carbon nanotubes reinforced
aluminum composite. Materials Science
and Engineering A, 381, 249–258.
24 Laha, T., Kuchibhatla, S., Seal, S., Li, W.
and Agarwal, A. (2007) Interfacial