PAO Accredited Laboratories (as of Dec. 2012) - DTI
PAO Accredited Laboratories (as of Dec. 2012) - DTI
PAO Accredited Laboratories (as of Dec. 2012) - DTI
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Products/<br />
Cl<strong>as</strong>s <strong>of</strong> Test<br />
Specific tests or<br />
Me<strong>as</strong>urements<br />
380 <strong>of</strong> 391<br />
Standard Method/<br />
Reference Standard<br />
Portable general<br />
Section 14 Screw terminals<br />
Section 15 Screwless terminals and electrical connections<br />
Annex A Test whether a conductive part may cause an<br />
electric shock<br />
Annex B Test lamps<br />
Annex C Abnormal circuit conditions<br />
Annex D Draught-pro<strong>of</strong> enclosure<br />
Annex E Determination <strong>of</strong> winding temperature rises by<br />
the incre<strong>as</strong>e-in-resistance method<br />
Annex F Test for resistance to stress corrosion <strong>of</strong> copper<br />
alloys<br />
Section 2 Cl<strong>as</strong>sification <strong>of</strong> luminaires PNS 1328:1996<br />
purpose luminaires Section 3 Markings (IEC 60598-1:1999-12)<br />
using incandescent Section 4 Construction<br />
lamps Section 5 External and internal wiring IEC 60598-2-4:1979<br />
Section 7 Provision for earthing<br />
Section 8 Protection against electric shock<br />
Section 9 Resistance to dust, solid object and moisture<br />
Section 10 Insulation resistance and electric strength<br />
Section 11 Creepage distances and clearances<br />
Section 12 Thermal test<br />
Section 13 Resistance to heat and fire<br />
Section 14 Screw terminals<br />
Section 15 Screwless terminals and electrical<br />
connections<br />
Annex A Test whether a conductive part may cause an<br />
electric shock<br />
Annex B Test lamps<br />
Annex C Abnormal circuit conditions<br />
Annex D Draught-pro<strong>of</strong> enclosure<br />
Annex E Determination <strong>of</strong> winding temperature rises by<br />
the incre<strong>as</strong>e-in-resistance method<br />
Annex F Test for resistance to stress corrosion <strong>of</strong><br />
copper alloys<br />
Amd. 3:1990<br />
Lamp Controlgear Clause 7 Markings PNS IEC 61347-2-<br />
(a.c. supplied<br />
Clause 8 Protection against accidental contact with<br />
3:2002<br />
electronic ball<strong>as</strong>ts for<br />
live parts<br />
fluorescent lamps) Clause 9 Terminals PNS IEC 901:2001<br />
Clause 10 Provision for earthing<br />
Clause 11 Moisture resistance and insulation PNS IEC 60081:2006<br />
Clause 12 Electric Strength Amd.3<br />
Clause 14 Fault conditions<br />
Clause 15 Protection <strong>of</strong> <strong>as</strong>sociated components IEC 60598-1<br />
Clause 16 Abnormal conditions<br />
Clause 18 Creepage distances and<br />
clearances<br />
Clause 19 Screws, current-carrying parts and connections<br />
Clause 20 Resistance to heat, fire and tracking<br />
Clause 21 Resistance to corrosion<br />
Lighting sets using Clause 4 Quality <strong>of</strong> Materials PNS 189:2000<br />
miniature and sub- Clause 5 Connection to Supply PNS/BS 6360<br />
miniature lamps for Clause 6 Fl<strong>as</strong>her Units PNS/BS 6746<br />
decorative purposes Clause 7 Lamps<br />
for indoor use Clause 8 Lamp Holders<br />
Clause 9 Wiring<br />
Clause 10 Protection Against Electric Shock<br />
Clause 11 Mechanical Requirements<br />
Clause 12 Electrical Requirements<br />
Clause 13 Temperature Requirements<br />
Clause 14 Marking<br />
Annex A Ball Pressure Apparatus<br />
Annex B Voltage Test on Complete Cord<br />
3.41 Electromedical equipment<br />
.02 Performance tests Personnel Dosimetry Performance ANSI/HPS N13.11-2009
Change language