Instructions for use: Ikus - Berlin Heart

If necessary: correct the settings
INSTRUCTION
1. Loosen the screw. See Fig. 20,
page 20; 2.
2. Remove the safety cap. See Fig. 20,
page 20; 1.
Fig. 20 Removing the safety cap
3. Correct the coarse setting: turn the
wheel for the coarse setting so that
the letters STD are perfectly aligned
with the tip of the embossed arrow.
See Fig. 21, page 20; 2.
4. Correct the fine setting: turn the
wheel for the fine setting so that the
black bar in the window is positioned
precisely at the level of the reference
line numbered 5. See Fig. 21,
page 20; 1.
5. Replace the safety cap and secure
1 2
with the screw. Fig. 21 Correcting setting
20/28 1000095x14 Rev. 8
1
2