work plan for soil remediation, sampling and analysis plan, site ...

The Project Manager (PM), Site Supervisor (SS), Certified Industrial Hygienist (CIH) andSite Safety Officer (SSO) are responsible for formulating and enforcing health and safetyrequirements, and implementing the HASP.2.1 PROJECT MANAGERThe PM has the overall responsibility for the project and to assure that the goals of theconstruction remedial action are attained in a manner consistent with the HASP requirements.The PM will coordinate with the SS and the SSO to assure that the remedial action goals arecompleted in a manner consistent with the HASP. The PM will identify contacts and telephonenumbers, with assistance from LANTDIV, of local health care providers, theNOSC/NOSCDR, the LEPC and other agencies that may be asked to provide emergencysupport during project activities. The PM will conduct a monthly health and safety audit of theproject using the Management Health and Safety Report Form.2.2 SITE SUPERVISORThe SS is responsible for field implementation of the HASP. The SS will coordinate with theSSO to establish communications with local health care providers, the NOSUNOSCDR, theLEPC and other outside organizations and agencies that may be asked to provide emergencysupport during project activities. The SS will be the main contact in any on-site emergencysituation. The SS will conduct periodic inspection of the work site to confirm compliance with *all health and safety requirements. The SS is also responsible for coordinating remedialactions for all deficiencies and for enforcing the OHM “Cardinal Safety Rules” (included inAppendix E) and the site specific health and safety procedures (included in Appendix B).2.3 SITE SAFETY OFFICERThe SSO has responsibility for administering the HASP relative to site activities, and will be inthe field full-time while site activities are in progress. The SSO’s primary operationalresponsibilities include personal and environmental monitoring, coordination of job safetyanalyses, personal protective equipment maintenance, and assignment of protection levels. TheSSO will direct all field activities involved with safety and is authorized to stop work when animminent health or safety risk exists. The SSO is responsible for assuring that all on-sitepersonnel understand all safety requirements.2.4 CERTIFIED INDUSTRIAL HYGIENISTThe CIH is responsible for the contents of the HASP and ensures that the HASP complieswith all federal, state and local health and safety requirements. If necessary, the CIH canmodify specific aspects of the HASP to adjust for on-site changes that affect safety. The CMwill coordinate with the SSO on all modifications to the HASP and will be available forOHM Project 16487SSHSP Health and Safety Plan July 1995Infomation herein is pt~prjdpty and confidential and to be used of ICIWSI to others only with explicit writte? permission of OHM Rwediationserviced Corp.2-l