1E9Ct5D

other type of energy, the parties interested in obtaining a permit for cogeneration mustcomply with the following:a) The electricity generated be used to meet the needs of the establishments associatedwith the cogeneration, which will be the natural persons or entities who:i) Utilize or produce the steam, thermal energy, or fuels that give rise to theprocesses on which the cogeneration is based; orii) Are co-owners of the facilities or partners of the company in question;b) The permit petitioner agrees to place its excess electricity at the disposal of the CFE.The petitioners must also present, in addition to the documentation that petitioners ofall permits must present, a study of the facilities that includes at least a general descriptionof the process, diagrams of the process, thermal balances, and specific fuel requirements,as well as the availability of the excesses of electrical power and energy thatwould be expected on a typical day, formulated on a monthly and annual basis.3.3.3. Independent production of electricityGeneration of electricity in a plant whose capacity is greater than 30 MW and exclusivelydestined for sale to the Commission or exportation is considered the independent productionof electricity.Petitioners for permits to independently produce electricity must comply with the followingrequirements:a) They must be natural persons or legal entities incorporated in accordance withMexican law and having their domicile in Mexico;b) The projects contemplated in the petition are included in the respective CFE planningand programs or are equivalent;c) The petitioners must agree to sell their electricity production exclusively to the CFEthrough long-term agreements under the terms of Article 36 bis or with theapproval of the SENER in the terms of the LSPEE, or to export all or part of said production.271Regulated Activities3.3.4. Small-scale production of electricitySmall-scale production is the generation of electricity destined for:a) Sale of all of the electricity generated to the CFE, in which case the projects cannothave a total capacity over 30 MW in an area determined by the SENER;b) The self-supply of small rural communities or isolated areas that lack electricityservices, in which case the projects cannot exceed 1 MW;c) Exportation within the maximum limit of 30 MW.In this case the following requirements must be satisfied: