SAE 2013 World Congress & Exhibition

Wednesday, April 17
Sustainable and Energy Efficient Manufacturing
Session Code: SDP109
Room O2-38
The goal of this session is to address developments in energy efficient manufacturing relevant to the automotive industry. Specifically, it will focus on
examining emerging energy efficient manufacturing technologies, as well as, best practices for established manufacturing methods. Additionally, the
session examines innovative design and modeling techniques relevant to energy systems employed in automotive manufacturing.
Organizers -
Chairpersons -
Moderators -
2013-01-1041
2013-01-1042
2013-01-1043
Deepak Gupta, Southeast Missouri State Univ.; Bhaskaran Gopalakrishnan, West Virginia Univ.;
Michael Santella, University of Tennessee; Antoinette W. Stein, EPP-LCA.org
Deepak Gupta, Southeast Missouri State Univ; Bhaskaran Gopalakrishnan, West Virginia Univ
Deepak Gupta, Southeast Missouri State Univ; Bhaskaran Gopalakrishnan, West Virginia Univ
ORAL ONLY
ORAL ONLY
2013-01-0829
2013-01-0830
2013-01-0831
"An Experimental Investigation on Performance and Emission studies
of a single cylinder diesel engine fuelled with blends of diesel and
Mahua oil Methyl Ester.".
On the design of high power low frequency harvesters for Car
Engines (Written Only -- No Oral Presentation)
Comparative analysis of Twin Cylinder C.I.Engine fueled with Diesel
and Preheated Karanj oil (Written Only -- No Oral Presentation)
Planned by Sustainable Development Program Committee / Engineering Meetings Board
Time Paper No. Title
Vipul Vibhanshu, M.Tech (Thermal Engineering); Naveen Kumar, Professor,
DTU, Delhi; Ashish Singh, Chinmaya Mishra, M.Tech (Thermal Engineering)
Hany Sherif, College of Eng., Qassim University; Mohamed Eltaib, Eng
College Qassim Univ & Assiut Univ.; Abdullah Alsuwaiyan, Unayzah Eng
College., Qassim University
Vivek W Khond, G H Raisoni College Of Engineering
Session Time:
Trends and Tips for Driving Low VOC Emissions for Cabin Interiors
Marilyn Black, UL AQS
Technical Keynote: A Business Perspective on Sustainable
Manufacturing
Roberto Lu, TE Connectivity
8:00 a.m.
Preliminary Information
Inclusion of a paper title in this preliminary program does not indicate acceptance of the manuscript. Final technical paper selections
expected by January 18, 2013 and the schedule will be finalized by January 25, 2013.
The impact of die start-up procedure for High Pressure Die Casting
Alastair Long, David Thornhill, Cecil Armstrong, Queen's University of
Belfast; David Watson, Ryobi Aluminium Castings (UK) Ltd
High-Throughput Manufacturing for Chrome Thin Film Coatings on
Aluminum Wheels
David Mount, ULVAC Japan, Ltd.
A study on innovation of material recycles: world first ELV bumper
into new vehicle bumper
Shigeki Nitta, Mazda Motor Corporation