SAE 2013 World Congress & Exhibition

Thursday, April 18
Panel Discussion: Utilizing Augmented Reality (AR) and Virtual Reality (VR) Technologies for
Improved Manufacturing Productivity.
Session Code:
Room D0-07B
Thursday, April 18
Vehicle Dynamics, Stability and Control (Part 3 of 4)
Session Code:
IDM600
AR and VR software and hardware continue to grow and be utilized in all facets of design and manufacturing. Independently, they can both improve
various aspects of design and manufacturing. But utilizing them together can play a significant role in getting product to market faster, safer and
cheaper. Therefore it is a natural evolution to integrate these technologies together. Come join us and hear from a panel of experts in aero, auto and
commercial vehicle on moving AR and VR to the production floor for improved manufacturing productivity.
Organizers -
2013-01-1226
2013-01-1228
2013-01-1229
2013-01-1230
2013-01-1231
2013-01-1232
2013-01-1233
Elizabeth S. Baron, Ford Motor Co.; Paul Robert Davies, Boeing; Marc LeDuc, SAE International;
Lorrie J. Sivich, Boeing
AC500
Effective Voltage Sag Ride Through using Ultracapacitor for Armored
Fighting Vehicle Application ¿ A case study
Prabhavathy RAJAPPAN, CVRDE,DRDO, Ministry of Defence; jaishankar
Cinnasamy, Ulaganathan Shanmuganathan, CVRDE,DRDO, Ministry of
defence; Dominic S M, CVRDE, DRDO,Ministry of defence
Robustness testing of real-time automotive systems using sequence
covering arrays
Graciela Becci, Gunwant Dhadyalla, University of Warwick; Alexandros
Mouzakitis, Jaguar Land Rover; James Marco, Cranfield University; Andrew
David Moore, QM Systems, Ltd.
Technical Challenges in Implementing New Electrical Features on
Existing Vehicle Architecture
Ajinkya Chinchwadkar, Alok Khare, General Motors Tech. Center
Adaptive Test System to Improve PCB Testing in the Automotive
Industry
Steffen Ostendorff, Joerg Sachsse, Heinz-Dietrich Wuttke, Jorge Meza
Escobar, Ilmenau University of Technology
Robustness Modelling of Complex Systems ¿ Application to the
Initialisation of a Hybrid Electric Vehicle Propulsion System
Ross McMurran, Jaguar Land Rover; R. Peter Jones, University of Warwick
Manufacturing Support Design for Low-Cost Instrument Clusters
(Written Only -- No Oral Presentation)
Sreedhar Thanthry, Delphi Corp.
IMPACT OF ELECTRICAL TRANSIENTS ON FUNCTIONAL SAFETY -
A SPECIAL CASE OF ELECTRIFICATION OF CONVENTIONAL
VEHICLE PLATFORMS (Written Only -- No Oral Presentation)
Sreegururaj Jayachander, Mahindra & Mahindra, Ltd.
Planned by Electrical and Electronic Systems Committee / Automobile Electronics Activity
Session Time:
1:00 p.m.
Preliminary Information
Inclusion of a paper title in this preliminary program does not indicate acceptance of the manuscript. Final technical paper selections
expected by January 18, 2013 and the schedule will be finalized by January 25, 2013.