SAE 2013 World Congress & Exhibition

Fuel Injection and Sprays (Part 4)
Session Code: PFL210
Room TBD
This session is devoted to experimental and computational work in the area of fuel injection systems and sprays. Topics include: spray
characterization, cavitation, multi-phase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, and
dissolved gas effects. Studies of both gasoline and diesel fuel sprays and fuel injection equipment are encouraged.
Organizers -
Tarek M. Abdel-Salam, East Carolina University; Essam El-Hannouny, Argonne National
Laboratory; Thomas W. Ryan; Jacqueline O'Connor, Sandia National Laboratories
Time Paper No. Title
2013-01-1587
2013-01-1588
2013-01-1589
2013-01-1590
2013-01-1591
2013-01-1592
2013-01-1593
2013-01-1594
Session Time:
1:00 p.m.
Preliminary Information
Inclusion of a paper title in this preliminary program does not indicate acceptance of the manuscript. Final technical paper selections
expected by January 18, 2013 and the schedule will be finalized by January 25, 2013.
Effect of Nozzle Geometry on
Macroscopic Behavior of Diesel Spray
in the Near-Nozzle Field
Weidi Huang, Tongji Univ.; Zhijun Wu, Tongji Univ; Huifeng Gong, Ya Gao,
Tongji Univ.; Jun Deng, Zongjie Hu, Tongji Univ; Liguang Li, Tongji Univ.
Spray Visualization and Characterization of a Micro-Variable
Circular-Orifice (MVCO) Injector Coupled with a Swirl Adapter for
Diesel Reformer Applications
Karthik Nithyanandan, MIng Huo, Univ of Illinois at Urbana-Champaign;
Chia-Fon Lee, Univ of Illinois and Tsinghua Univ; Deyang Hou, QuantLogic
Corporation
10000 psi Poppet Injector with Electronic Flow Rate Control and
Spray Guiding
Andrew Meyer, Beginnings Technology Inc.
4th Generation Common Rail System
Shuichi Matsumoto, DENSO Corp
Optical investigation of the effects on injection and combustion
phases of piezo injectors in a transparent CR diesel engine
Ezio Mancaruso, Bianca Maria Vaglieco, Istituto Motori CNR; Agnese
Magno, Università Federico II di Napoli
Numerical Study of DMF Spray and Mixture formation process for GDI
Engine
Haiying Li, Birmingham Univ; Cao li, Jaguar Land Rover; Xiao Ma, PoWen
TU, Hongming Xu, Akbar Ghafourian, Birmingham Univ
Modeling of Narrow-Angle Sprays Using a Spray Model based on the
Moments of the Droplet Size Distribution
Nwabueze Emekwuru, Univ. of Wolverhampton
Investigation of Key Mechanisms for Liquid Length Fluctuations in
Transient Vaporizing Diesel Sprays
Jaclyn Johnson, Michigan Technological Univ.; Hai-Wen Ge, ESI Mindware
Inc; Jeffrey Naber, Seong-Young Lee, Michigan Technological Univ; Eric
Kurtz, Nan Robarge, Ford Motor Co