SAE 2013 World Congress & Exhibition

Room W2-63
This session focuses on combustion technologies in both 4-stroke and 2-stroke engines characterized by 1) ignition by an external energy source
that serves to control combustion phasing, and 2) a combustion rate that is limited by flame propagation. The scope of topics includes studies of
mixture formation, ignition, knock, engine efficiency, flame propagation, alternative fuels and emissions formation. Part 2 of 3: Alternative Fuels
Organizers -
Terrence Alger, Southwest Research Institute; Richard S. Davis, General Motors LLC; Mark C.
Sellnau, Delphi Corp.
Time Paper No. Title
2013-01-1316
2013-01-1317
2013-01-1318
2013-01-1319
2013-01-1320
2013-01-1321
2013-01-1322
2013-01-1323
Session Time:
8:00 a.m.
Preliminary Information
Inclusion of a paper title in this preliminary program does not indicate acceptance of the manuscript. Final technical paper selections
expected by January 18, 2013 and the schedule will be finalized by January 25, 2013.
Characterization of Ethanol Blends Combustion processes and Soot
formation in a GDI Engine
Francesco Catapano, Silvana Di Iorio, Maurizio Lazzaro, Paolo Sementa,
Bianca Maria Vaglieco, Istituto Motori CNR
Combustion Characteristics and Emissions of Low2-
Methylfuran/Gasoline Blend in a DISI Engine
Chongming Wang, Hongming Xu, Thomas Lattimore, University of
Birmingham
In-Cylinder Spectroscopic Measurements of Combustion Process in
a SI Engine Fuelled with Butanol-Gasoline Blend
Cinzia Tornatore, Simona Merola, Gerardo Valentino, Luca Marchitto, Istituto
Motori CNR
Performance and Emissions of an SI Engine using Methanol-Water
Blends
Louis Sileghem, Thomas Huylebroeck, Arvid Van den Bulcke, Jeroen
Vancoillie, Sebastian Verhelst, Ghent University
Mass Fraction Burn Investigation of Syngas in a DI SI Engine
Ftwi Yohaness Hagos, Abd Rashid Abd Aziz, Universiti Teknologi
PETRONAS
Fuel Economy and CO2 Emissions of Ethanol-Gasoline Blends in a
Turbocharged DI Engine
Hosuk H. Jung, Thomas G. Leone, Michael H. Shelby, James E. Anderson,
Travis Collings, Ford Motor Co
Investigation to leveraging effect of ethanol direct injection (EDI) in a
gasoline port injection (GPI) engine
Yuan Zhuang, Guang Hong, University of Technology, Sydney
Emission Characteristics of Gasoline and LPG in a Spray-guidedtype
Direct Injection Engine
Cheolwoong Park, Yunseo Park, Seungmook Oh, Yonggyu Lee, Tae Young
Kim, Hongsuk Kim, Young Choi, Kern-Yong Kang, Korea Institute of
Machinery & Materials
Planned by Combustion and Fuels Committee / Powertrain Fuels and Lubricants Activity