SAE 2013 World Congress & Exhibition

Systems Engineering (Part 1)
Session Code:
Room D0-04AB
Systems Engineering (Part 2)
Session Code:
Room D0-04AB
AE312
AE312
Thursday, April 18
This session addresses automotive requirements, high level system design, cost analysis, simulation, modeling, testing, and validation. System
includes components, sub assemblies, computer based controllers, hardware and software. The session focuses on intelligent and efficient
approaches to analysis, design (not detailed design), modeling, measurement, document management and optimizing performance. Topics on effect
of cost, and human machine interface are covered.
Organizers -
Subramaniam Ganesan, Oakland Univ.; Kanaparty Rao, IBES Inc.
Thursday, April 18
This session addresses automotive requirements, high level system design, cost analysis, simulation, modeling, testing, and validation. System
includes components, sub assemblies, computer based controllers, hardware and software. The session focuses on intelligent and efficient
approaches to analysis, design (not detailed design), modeling, measurement, document management and optimizing performance. Topics on effect
of cost, and human machine interface are covered.
Organizers -
2013-01-1398
Subramaniam Ganesan, Oakland Univ.; Kanaparty Rao, IBES Inc.
2013-01-1399
2013-01-1400
2013-01-1401
Finite element Analysis of Door Closing Effort (Written Only -- No
Oral Presentation)
Planned by Polymers and Coatings Committee / Materials Engineering Activity
Planned by Electrical and Electronic Systems Committee / Automobile Electronics Activity
Time Paper No. Title
Peter Qiu, Chery Automobile Co.; Yuan Qu, Chery Automobile Co Ltd; Shen
Wu, Chery Automobile Co; Min Sun, Chery Automobile Co Ltd
Session Time:
8:00 a.m.
Preliminary Information
Inclusion of a paper title in this preliminary program does not indicate acceptance of the manuscript. Final technical paper selections
expected by January 18, 2013 and the schedule will be finalized by January 25, 2013.
Session Time:
1:00 p.m.
Preliminary Information
Inclusion of a paper title in this preliminary program does not indicate acceptance of the manuscript. Final technical paper selections
expected by January 18, 2013 and the schedule will be finalized by January 25, 2013.
Achieving a Scalable E/E-Architecture using AUTOSAR and
Virtualization
Dominik Reinhardt, Dirk Kaule, BMW AG; Markus Kucera, University of
Applied Science Regensburg
Fatigue Life Improvement through the ¿NOVA¿ Process
Mehieddine Rababeh, Badih A. Jawad, Lawrence Technological University
Better Vehicle Performance through Improved Throttle Response
Badih Jawad, Kingman Yee, Liping Liu, Selin Arslan, Lawrence
Technological Univ.