SAE 2013 World Congress & Exhibition
SAE 2013 World Congress & Exhibition
SAE 2013 World Congress & Exhibition
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Wednesday, April 17<br />
Advanced Analysis, Design, and Optimization of Materials, Restraints, and Structures for<br />
Enhanced Automotive Safety and Weight Reduction (Part 3)<br />
Session Code: M103<br />
Room D0-06A<br />
Papers with an emphasis on, but not limited to, innovative ideas to enhance automotive safety with improved material constitutive modeling, analysis<br />
method developments, simulation and pre/post processing tools, optimization techniques, crash code developments, finite element model updating,<br />
model validation and verification techniques, dummies and occupants, restraint systems, passive safety as well as lightweight material applications<br />
and designs are highly encouraged.<br />
Organizers -<br />
<strong>2013</strong>-01-1007<br />
<strong>2013</strong>-01-1008<br />
<strong>2013</strong>-01-1009<br />
<strong>2013</strong>-01-1011<br />
Jwo Pan, Univ. of Michigan-Ann Arbor; Tau Tyan, Ford Motor Co.; Guofei Chen, United States<br />
Steel Corp.; Wei Li, General Motors LLC; William J. Altenhof, Univ. of Windsor; Sheng-Dong Liu,<br />
Generalety LLC<br />
ORAL ONLY<br />
ORAL ONLY<br />
<strong>2013</strong>-01-0644<br />
<strong>2013</strong>-01-0645<br />
Random Vibration Testing Development for Engine Mounted Products<br />
Considering Customer Usage<br />
New Methodologies for Efficient and Accurate Fatigue Prediction of<br />
Seam Welds<br />
Fatigue Life Prediction of an Automobile Cradle Mount<br />
Fatigue Evaluation of Notched Plate Specimens by the Battelle<br />
Structural Stress Method<br />
Planned by Materials Modeling and Testing Committee / Materials Engineering Activity<br />
Time Paper No. Title<br />
Liang Wang, Oakland University; Robert Burger, Yung-Li Lee, Chrysler<br />
Group LLC; Keyu Li, Oakland Univ<br />
Michael Hack, Frank Zingsheim, LMS International<br />
Touhid Zarrin-Ghalami, Ali Fatemi, Univ. of Toledo; Yung-Li Lee, Chrysler<br />
Group LLC<br />
Jeong Kyun Hong, Thomas Forte, Battelle<br />
Session Time:<br />
8:00 a.m.<br />
Preliminary Information<br />
Inclusion of a paper title in this preliminary program does not indicate acceptance of the manuscript. Final technical paper selections<br />
expected by January 18, <strong>2013</strong> and the schedule will be finalized by January 25, <strong>2013</strong>.<br />
Material Models for Simulation of a Lithium-Ion Battery Module<br />
Specimen under Punch Indentation<br />
Mohammed Yusuf Ali, Univ. of Michigan-Ann Arbor; Wei-Jen Lai, Jwo Pan,<br />
Univ of Michigan-Ann Arbor<br />
Mechanical Behavior of Lithium-Ion Battery Cell and Module<br />
Specimens under Constrained Compression<br />
Wei-Jen Lai, Mohammed Yusuf Ali, Jwo Pan, Univ of Michigan-Ann Arbor<br />
Effects of pore distributions on ductility of thin-walled high pressure<br />
die-cast magnesium<br />
Kyoo Sil Choi, Dongsheng Li, Xin Sun, Pacific Northwest National<br />
Laboratory<br />
Use of Finite Element Simulation for Modeling Vertically Aligned<br />
Carbon Nanotube Arrays Based on Structural Mechanics Principles<br />
Johnson Joseph, Y Charles Lu, University of Kentucky
Change language