SAE 2013 World Congress & Exhibition

Tuesday, April 16
Materials and Residual Stress Testing Development
Session Code: M106
Room D0-05B
Key words: residual stress, retained austenite, x-ray diffraction, neutron diffraction, induction hardening, carburizing, shot peening, quench and
template
Organizers -
2013-01-0415
2013-01-0416
2013-01-0417
2013-01-0418
Jwo Pan, Univ. of Michigan-Ann Arbor; Gerald A. Shulke, Xichen Sun, Chrysler Group LLC; Xin
Zhang, Ftech R&D North America
ORAL ONLY
2013-01-0171
2013-01-0172
2013-01-0173
Robust Design for Vehicle Handling and Ride Comfort with Multiobjective
Evolutionary Algorithm (Written Only -- No Oral
Presentation)
Development of an ESP control logic based on force measurements
provided by smart tires (Written Only -- No Oral Presentation)
Mass estimation and axle load distribution algorithm for EBS of
buses (Written Only -- No Oral Presentation)
A model-based mass estimation and optimal braking force
distribution algorithm of tractor and semi-trailer combination
(Written Only -- No Oral Presentation)
Planned by Materials Modeling and Testing Committee / Materials Engineering Activity
Time Paper No. Title
Yong Luo, Jinglai Wu, Wenkui Fu, Yunqing Zhang, Huazhong University of
Science and Tech.
Edoardo Sabbioni, Federico Cheli, Stefano Melzi lng, Politecnico di Milano
Zhigen Nie, Changfu Zong, Ying Wan, Jilin Univ
Zongyu Liu, College of automotive engineering; Hongyu Zheng, ASCL;
Wenkai Xu, College of automotive engineering
Session Time:
9:30 a.m.
Preliminary Information
Inclusion of a paper title in this preliminary program does not indicate acceptance of the manuscript. Final technical paper selections
expected by January 18, 2013 and the schedule will be finalized by January 25, 2013.
Microstructure and Sintering Mechanism of C/Cu Composites by
Mechanical Alloying/ Spark Plasma Sintering
Xu Ran, Changchun University
Analysis on Residual Stress Profiles in Distorted Aluminum Engine
Blocks by Neutron Diffraction
Anthony Lombardi, C. (Ravi) Ravindran, Ryerson University; Dimitry
Sediako, National Research Council Canada; Robert Mackay, Nemak of
Canada
Mapping Residual Stress Distributions in Advanced High Strength
Steel Automotive Body Panels and Structural Components
James Pineault, Proto Manufacturing Inc.
Examination of Austempering Heat Treatments on Carburized
Automotive Steels
Andrew D. Clark, Derek O. Northwood, Randy J. Bowers, University of
Windsor; Xichen Sun, Peter Bauerle, Chrysler Group LLC
Planned by Materials Modeling and Testing Committee / Materials Engineering Activity