12.01.2013 Views

Pearl Building Rating System - Estidama

Pearl Building Rating System - Estidama

Pearl Building Rating System - Estidama

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

LBo-10: Light Pollution Reduction<br />

Intent To encourage the reduction of night time light pollution and its associated impacts on<br />

human and ecological health.<br />

Credit<br />

Requirements<br />

GENERAL<br />

Demonstrate that the project meets the following lighting requirements:<br />

Interior lighting<br />

� The angle of maximum candela from each interior luminaire, as positioned in the<br />

building, must not exit through the windows. Alternatively, all non-emergency<br />

interior lighting must be controlled to automatically turn off outside the normal<br />

hours of occupancy. Manual override must be enabled to allow for any out-of-hours<br />

use.<br />

Exterior lighting<br />

� All non safety and security external lighting, including display, advertising and<br />

speciality lighting, must be automatically switched off between 23.00hrs and<br />

07.00hrs and outside these hours if daylight levels are sufficient.<br />

o If safety lighting is provided and will be used between 23.00hrs and<br />

07.00hrs, this part of the lighting system must comply with the lower levels<br />

of lighting recommended during these hours by IESNA RP-33-99 and IES RP-<br />

8. For example by using an automatic switch to reduce the lighting levels<br />

at 23.00 or earlier.<br />

o If security lighting is provided, it must be activated using motion sensors so<br />

that luminaires only turn on when someone is in the immediate area.<br />

Lighting levels at the boundary and beyond<br />

� All projects must be classified under one of the zones defined in the IECC 2009<br />

Exterior Lighting Table 505.6.2(1). The exterior lighting must be designed to meet<br />

the following requirements:<br />

Lighting Zone<br />

LZ1:<br />

Parks and rural<br />

areas<br />

LZ2:<br />

Residential areas<br />

LZ3:<br />

All other areas<br />

Maximum Initial<br />

Illuminance at Site<br />

Boundary, Lux<br />

Maximum Initial<br />

Illuminance at<br />

Specified Distance<br />

Beyond Site<br />

Boundary, Lux<br />

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!