Wellgreen Project Preliminary Economic Assessment ... - OTCIQ.com

Table 10.4 Prophecy Platinum 2011 Drill Results
Borehole
ID
From
(m)
To
(m)
Length
(m)
Prophecy Platinum Corp. 10-5 1193460500-REP-R0001-02
Wellgreen Project Preliminary Economic Assessment,
Yukon, Canada
Ni
(%)
Cu
(%)
Pt
(g/t)
Pd
(g/t)
Au
(g/t)
WS11-184 8.20 478.80 470.60 0.29 0.13 0.20 0.23 0.03
includes 429.30 478.80 49.50 0.71 0.45 0.65 0.52 0.10
WS11-185 8.99 57.88 48.89 0.21 0.02 0.06 0.10 0.01
WS11-188 7.53 464.91 457.38 0.29 0.18 0.34 0.33 0.05
includes 268.38 389.29 120.91 0.36 0.30 0.63 0.54 0.08
WS11-190 4.27 364.57 360.30 0.24 0.09 0.16 0.21 0.03
WS11-191 7.07 89.92 82.85 0.21 0.02 0.08 0.14 0.02
WS11-192 9.45 394.35 384.90 0.30 0.15 0.28 0.30 0.04
includes 272.19 291.42 19.23 0.41 0.28 0.74 0.56 0.06
10.4 S AMPLING M ETHODS
10.4.1 HISTORICAL METHODS
Sampling details for historic programs have not been verified by Tetra Tech. No
documented quality assurance/quality control (QA/QC) programs were available for
review. Hudson Yukon Mining assayed all core at their internal lab in Flin Flon,
Manitoba.
Tetra Tech recommends that Northern Platinum continue to research the details of
the historical programs by Hudson Yukon Mining and the Kluane JV.
10.4.2 CORONATION METHOD AND APPROACH
The drill core was logged by the company geologist and assistants under the direct
supervision of Mr. Rory Calhoun, P.Geo., at the designated facilities of the
Coronation Minerals base camp on site. The geologist would record lithology,
mineralization, structures, sample number, etc., and the assistants would record the
geotechnical data (rock quality designation (RQD) and recovery).
Sample length would vary due to lithology and mineralization observed by the
geologist and the core would be marked accordingly. Most sampled intervals were
1.52 m or 5 ft in length. The assistant would then take the core into the saw shack
and cut it in half using a core saw. After cutting, the core would be returned to the
core tray and the geologist would sample it. Half of the split core would be placed in
a plastic sample bag with the sample tag. The sample number was also written on
the outside of each bag for easy identification. No sample tags were left in the core
trays.