User Manual 08/2003 Edition

02.99 08.02
Cable for
PROFIBUS
(with electronics
power supply)
Cable for
Inputs/outputs
Siemens AG 2003 All rights reserved
SIMODRIVE POSMO A User Manual (POS1) – 08.03 Edition
2.4 Mounting SIMODRIVE POSMO A
3 x 0.75 mm 2 , with or without shield
––> for the electronics power supply
+
2 x 0.35 mm 2 , with shield ––> for PROFIBUS
not to scale
PROFIBUS
cable
(with
electronics
power supply)
6 – 12
1) Remove cores which are not used
8
Shield
120
100
Fig. 2-19 Preparing the PROFIBUS cable with electronics power supply
Recommendation for 5–conductor cables sold by the meter:
6ES7194-1LY00-0AA0
5
10
1)
PROFIBUS
2 x 3 x max. 0.75 mm2 , with shield, flexible conductor (finely–stranded)
Gland:
The dummy plug provided should be replaced by a suitable PG11
gland
(e.g.: Pflitsch Company, type PG15152m2x6 – gland assembly
PG11/13.5 mounted using a multi–sealing insert for 2 cables with
6 mm diameter).
not to scale
I/O cable
1) Remove cores
which are not used
8 – 12
10
Shield
Fig. 2-20 Preparing cables for inputs/outputs
2 Installing and Connecting–up
120
10
1)
1)
2-47
2