User Manual 08/2003 Edition

2
2 Installing and Connecting–up 02.99 04.01 08.01
2.6 Technical data
Table 2-7 Technical data for the POSMO A – 300 W positioning motor, continued
Climatic
ambient
conditions
Climatic
operating
conditions
Climatic
transport and
storage
conditions
Mechanical
ambient
conditions
Tested
vibration and
shock
stressing in
operation
Vibration and
shock
stressing
during
transport
Pollutant
stressing
2-62
Designation Description
Relevant Standards IEC 68-2-1, IEC 68-2-2
Operating temperature
range
Extended operating
temperature range
0 ... 45 C
to +65 C with continuous reduced motor current
Relevant Standards acc. to DIN EN 60721, Part 3-3 Class 3K5
Transport and storage
temperature range
–40 ... +70 C
Relevant Standards acc. to DIN EN 60721, Parts 3-1 and 3-2 Classes 2K4 and 1K4
Relevant Standards IEC 68-2-32
Vibration stressing in operation
Note:
Data applies for components which have been packed ready
for transport.
Frequency range With constant deflection = 7 mm
2 ... 9 Hz
Frequency range With constant acceleration = 20 m/s
9 ... 200 Hz
2 (2 g)
Relevant Standards IEC 68-2-6, DIN EN 60721 Part 3-0 and Part 3-3 Class 3M6
Shock stressing in operation
Peak
acceleration
Shock duration 6 ms
max. 250 m/s 2 (25 g)
Relevant Standards DIN EN 60721 Part 3-0 and Part 3-3 Class 3M6
Note:
In order to ensure a long lifetime, the motor should be supported if it is subject to external
vibration stressing (e.g. continuous operation at the resonant frequency)
Tapped holes are provided to support the motor.
Relevant Standards DIN EN 60721 Part 3-3 Class 2M2
Relevant Standards IEC 68-2-60
Note:
Data applies for components which have been packed ready
for transport.
Siemens AG 2003 All rights reserved
SIMODRIVE POSMO A User Manual (POS1) – 08.03 Edition