User Manual 08/2003 Edition

Foreword
Information about
using this manual
vi
Should further information be desired or should particular problems
arise, which are not covered sufficiently for the purchaser’s purposes,
the matter should be referred to the local Siemens sales office.
The following should be observed when using this manual:
1. Help: The following help is available for the reader:
Complete table of contents
Header line (as orientation):
the main chapter is in the upper header line
the sub–chapter is in the lower header line
Appendix with
– Abbreviations and List of References
– Index
If you require information on a specific term, look in the Appendix
under ”Index” for this term.
The Chapter number as well as the page number is specified
where information on this term can be found.
2. Identifying ”new” or ”revised” information
The documentation 02.99 edition is the first edition.
How is the ”new” or ”revised” information identified for the other
editions?
This is specified directly next to the information ”from SW x.y”.
The edition is in the header line on the respective page > 02.99.
3. Notation
means ”corresponds to”
Numerical representation (examples)
– FFFFhex Hexadecimal number
– 0101bin Binary number
– 100dec Decimal number
PROFIBUS signals (examples)
– STW.3 Control word bit 3
– ZSW.11 Status word bit 11
Parameter (examples)
– P10 Parameter 10 without index
– P82:28 Parameter 82 mit Index 0, 1, ... 27 (28 indices)
– P82:13 Parameter 82 with index 13
– P82:x Parameter with undefined index x
– P56.2 Parameter 56 bit 2
Siemens AG 2003 All rights reserved
SIMODRIVE POSMO A User Manual (POS1) – 08.03 Edition