ISDN ANALYZER D1080 - messkom.de

ISDN ANALYZER D1080 USER’S MANUAL REV. 5
A special cursor line indicates the end of the events that can be
analyzed. The line is different according to the presence of filters,
as shown below:
100
with no filters
with at least one filter
-------------------^-----------------
!------------------^----------------!
11.2.1.2. Exploded format
This format supplies additional information about the data, such
as the direction of the event, the time elapsed between the
beginning of the test and the occurrence of the event and the
decoding of level 3 messages for each significant octet.
The direction of the event is displayed as follows: :
�� NT , if from TE to NT
TE �� , if from NT to TE.
The time elapsed from the beginning of the test to the occurrence
of the event (ΔT) is expressed in hours, minutes, seconds and
milliseconds (msec).
The absolute time of the test takes into consideration the time
setting in the SETTING UP page (see Chapter 6).
For level 3 messages, apart from the information given in the
COMPRESSED format, all the INFORMATION ELEMENTS (i.e.) are
shown.
CHAPTER 11. ANALYZING THE SIGNALING PROTOCOL