ISDN ANALYZER D1080 - messkom.de

USER’S MANUAL REV. 5 ISDN ANALYZER D1080
5. OPERATION
The graphic interface of the instrument is made up of “tree”
menus and functional buttons with a different meaning according
to the level.
The main menu is used to select either the tests or the instrument
configuration.
When the instrument is turned on, an autotest is carried out in
order to ensure the correct initialization of the instrument.
! During this stage do not connect the line to the
measurement plugs.
At the end of the autotest procedure, the instrument displays the
main window with the currently installed firmware version and the
serial number of the instrument, as shown in Fig. 5-1:
CHAPTER 5. OPERATION 37